B-Line Eaton series single met...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3,496.28
Image coming soon

B-Line Eaton series single meter sockets, 100 A, Test block, Ring type, 3R, Stainless steel finish, #14-2/0, #14-2/0, Steel, Surface mount, 4 jaws, 1

(No reviews yet) Write a Review

Model: 117 TB

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3,496.28
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series single meter sockets, 100 A, Test block, Ring type, 3R, Stainless steel finish, #14-2/0, #14-2/0, Steel, Surface mount, 4 jaws, 1 position, 1Ø/3W, Overhead and underground feed

Manufacturer Resources

Product Specs

Amperage Rating:
100 A
Bypass:
Test block
Certifications:
UL
Compliances:
EUSERC Approved
Cover Door Type:
Ring
Degree Of Protection:
3R
Line Lug Size:
#14-2/0
Load Lug Size:
#14-2/0
Mounting Method:
Surface mount
Number Of Jaws:
7
Number Of Positions:
1
Number Of Wires:
3Ø/4W
Product Height:
24 in
Product Length Depth:
4.625 in
Product Weight:
22.1 lb
Product Width:
12 in
Special Features:
Overhead and underground feed
Department:
Electrical
Product Finish:
ANSI 61 gray paint
Product Material:
Galvanized steel

B-LINE 117 TB – Frequently Asked Questions

1) Will this Eaton B-Line meter socket work for a 100 amp residential service?
Yes, the B-Line 117 TB meter socket is rated 100 A and built as a single-position socket, so it serves one service. It takes both overhead and underground feed, so you can use it on a mast drop or a lateral without changing sockets.
2) What size conductors can I land in the line and load lugs on the B-Line 117 TB meter socket?
Both the line and load lugs accept #14 through 2/0 conductors. That covers the usual 2/0 aluminum or 1/0 copper run used on a 100 amp service, and it means you do not need separate reducers for smaller load-side conductors.
3) Can this meter socket be mounted outdoors on an exterior wall?
Yes. The 117 TB carries a Type 3R enclosure rating, which is the rainproof rating used for outdoor meter equipment, and it is a surface mount unit that fastens to the wall face rather than recessing into it. Housing is galvanized steel.
4) Is this a ringless or ring type meter socket?
It is a ring type socket, meaning the meter is retained by a sealing ring rather than by a ringless cover. Utilities specify one or the other and they are not interchangeable in the field, so confirm your utility accepts ring type before ordering the 117 TB.
5) Is the Eaton B-Line 117 TB meter socket EUSERC approved?
Yes, it is EUSERC approved and UL listed. EUSERC approval matters if you are working in the western utility territories that enforce those drawings, and many of them will reject a socket that is not on the EUSERC list.
6) Does the 117 TB have a bypass, and what kind?
It comes with a test block bypass. That gives the utility a way to bypass the meter for testing or meter swaps without dropping service to the customer. If your utility spec calls for a lever bypass or no bypass at all, this is not the socket to order.
7) What are the dimensions of the B-Line 117 TB meter socket for wall layout?
It measures 24 inches high by 12 inches wide with a 4.625 inch depth off the wall, and weighs 22.1 pounds. Plan the meter height per your utility and allow the 4-5/8 inch projection when you are laying out next to a disconnect or siding trim.
8) Can one B-Line 117 TB socket serve two apartments or two meters?
No. It is a one position socket, so it holds a single meter for a single service. For a duplex or small multi-family you need a multi-position socket or a metering pack rated for the number of tenants.
9) Do I need a separate socket if the service comes in underground instead of overhead?
No. The 117 TB is built for both overhead and underground feed, so the same unit works whether you are landing a mast drop from above or a lateral from below. Line lugs accept #14 through 2/0 either way.
How fast can I get the B-LINE 117 TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 117 TB come with a warranty?
Absolutely. The B-LINE 117 TB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 117 TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 117 TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!