B-Line B22SHA-120SS4 Eaton ser...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$486.83
B-Line B22SHA-120SS4 Eaton series strut back-to-back welded channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SHA hole pattern, B22 channel type, Stainless steel type 304

B-Line B22SHA-120SS4 Eaton series strut back-to-back welded channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SHA hole pattern, B22 channel type, Stainless steel type 304

(No reviews yet) Write a Review

Model: B22SHA-120SS4
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$486.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut back-to-back welded channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, SHA hole pattern, B22 channel type, Stainless steel type 304

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Channel Type:
B22
Hole Pattern:
SHA
Material Gauge:
12 Gauge
Product Height:
1.62 in
Product Length Depth:
120 in
Product Weight:
36.4 lb
Product Width:
1.62 in
Department:
Electrical
Product Finish:
Stainless steel type 304
Product Material:
Steel

B-LINE B22SHA-120SS4 – Frequently Asked Questions

1) What is the difference between B22 back-to-back strut and standard single B22 channel?
The B-Line B22SHA-120SS4 is two channels welded back to back, so the finished section measures 1.62 inches by 1.62 inches rather than the 1-5/8 by 13/16 profile of a single shallow channel. You get an open slot on both faces, which lets you attach fittings, clamps and spring nuts from either side. Use it where a run has to carry load in more than one direction or where you want to hang from one face and brace off the other.
2) Is this B-Line strut channel actually stainless, or just plated steel?
It is Type 304 stainless steel, not a plated or painted carbon channel. That matters if the run is outdoors, in a wash-down area, a food plant, a water treatment facility or a coastal site where galvanized strut would eventually bloom rust. Pair it with stainless nuts, bolts and fittings so you don't set up galvanic corrosion at the connections.
3) Will standard strut nuts and fittings fit this B22 back-to-back channel?
Yes. B22 is built from the standard 1-5/8 inch channel profile, so ordinary 1-5/8 strut nuts, spring nuts, pipe clamps, beam clamps and angle fittings engage the slot in the normal way. Because it is welded back to back, both faces accept hardware. Specify Type 304 stainless fittings to match the channel.
4) What does the SHA hole pattern mean on B-Line B22 strut?
SHA is B-Line's designation for a slotted hole pattern punched in the channel back, so the B22SHA-120SS4 arrives pre-punched rather than solid. The slots let you bolt the strut to structure, or run all-thread and hardware through the back, without field drilling stainless, which is slow work and destroys the corrosion protection at every hole. If you need a solid back, SHA is the wrong suffix.
5) What part number do I order to repeat this exact stainless strut on the rest of the job?
The manufacturer part number is B22SHA-120SS4 from Eaton's B-Line series. Reading the code: B22 is the back-to-back channel type, SHA is the slotted hole pattern, 120 is the length in inches, and SS4 denotes Type 304 stainless. Quote that full string when you are standardizing a facility so you don't end up with plain or galvanized sticks mixed into a stainless run.
6) Does the strut channel come with nuts, bolts or fittings?
No. The B22SHA-120SS4 ships as bare channel only, a single 120 inch welded back-to-back stick. Strut nuts, hardware, end caps, closure strip, post bases and any clamps or brackets are ordered separately, and on a 304 stainless run you'll want those accessories in stainless as well.
How fast can I get the B-LINE B22SHA-120SS4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B22SHA-120SS4 come with a warranty?
Absolutely. The B-LINE B22SHA-120SS4 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B22SHA-120SS4?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B22SHA-120SS4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!