You may also like
B-Line B52A-120GRN Eaton series strut back-to-back welded channel, .81" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, B52 channel type, DURA GREEN
Model: BLN-B52A-120GRN
Eaton B-Line series strut back-to-back welded channel, .81" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, B52 channel type, DURA GREEN
B-LINE
$154.04
$140.80
B-Line B54A-240GRN Eaton series strut back-to-back welded channel, .81" channel height, 240" channel length, 1.62" channel width, Steel, 14 Gauge, B54 channel type, DURA GREEN
Model: BLN-B54A-240GRN
Eaton B-Line series strut back-to-back welded channel, .81" channel height, 240" channel length, 1.62" channel width, Steel, 14 Gauge, B54 channel type, DURA GREEN
B-LINE
$123.80
$100.30
B-Line B24A-240GRN Eaton series strut back-to-back welded channel, 1.62" channel height, 240" channel length, 1.62" channel width, Steel, 14 Gauge, B24 channel type, DURA GREEN
Model: BLN-B24A-240GRN
Eaton B-Line series strut back-to-back welded channel, 1.62" channel height, 240" channel length, 1.62" channel width, Steel, 14 Gauge, B24 channel type, DURA GREEN
B-LINE
$124.89
$100.30
B-Line Eaton series strut back-to-back welded channel, .81" channel height, 240" channel length, 1.62" channel width, Steel, 12 Gauge, B52 channel typ
Model: BLN-B52A-240GLV
Eaton B-Line series strut back-to-back welded channel, .81" channel height, 240" channel length, 1.62" channel width, Steel, 12 Gauge, B52 channel type, Pre-galvanized
B-LINE
$13,314.93
B-Line B52A-240HDG Eaton series strut back-to-back welded channel, .81" channel height, 240" channel length, 1.62" channel width, Steel, 12 Gauge, B52 channel type, Hot-dipped galvanized
Model: BLN-B52A-240HDG
Eaton B-Line series strut back-to-back welded channel, .81" channel height, 240" channel length, 1.62" channel width, Steel, 12 Gauge, B52 channel type, Hot-dipped galvanized
B-LINE
$202.53
Eaton B-Line series strut back-to-back welded channel, .81" channel height, 240" channel length, 1.62" channel width, Steel, 12 Gauge, B52 channel type, DURA GREEN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Channel Type:
- B52
- Material Gauge:
- 12 Gauge
- Product Height:
- .81 in
- Product Length Depth:
- 240 in
- Product Weight:
- 52.54 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Finish:
- DURA GREEN
- Product Material:
- Steel
B-LINE B52A-240GRN – Frequently Asked Questions
1) Will standard strut nuts and fittings fit the B52 channel?
The B52 profile is 1.62 in wide, which is B-Line's 1-5/8 inch strut series, so channel nuts, clamps, and fittings sized for 1-5/8 inch strut are the right hardware family for it. Because this is the welded back-to-back version, both faces are slotted, letting you land fittings on either side of the member.
2) What does back-to-back welded channel mean on the B52 strut, and when would I use it instead of a single channel?
Back-to-back welded means two B52 channel sections are joined along their backs and welded into one member, giving you a closed box profile with slots facing both directions. Contractors reach for it on longer trapeze spans and heavier runs where a single open channel would deflect, or where fittings need to attach from both sides. For short drops and light conduit, a single open channel section is the simpler pick.
3) What is the DURA GREEN finish on B-Line strut and where can it be used?
DURA GREEN is Eaton B-Line's green painted corrosion-resistant coating on the steel channel. It is a coated interior/protected finish, so it is commonly specified for indoor mechanical and electrical rooms and plants where bare or pre-galvanized steel would show surface rust. For direct outdoor exposure or wet, corrosive environments, buyers usually spec a hot dip galvanized or stainless channel instead.
4) Does the B-Line B52A-240GRN channel come with nuts, bolts, or mounting brackets?
No. The B52A-240GRN is the channel stick only, supplied as a single 240 in back-to-back welded member. Channel nuts, threaded rod, post bases, beam clamps, and any fittings are ordered separately, so take off your hardware count before you place the order.
5) Can the B52A-240GRN 20 foot strut be cut down on site?
Yes. It ships as a 240 in stick of 12 gauge steel channel and is routinely cut to length in the field with a bandsaw or chop saw. Cutting exposes bare steel at the ends, so touch up the cut with a cold galvanizing or matching paint if you want the DURA GREEN corrosion protection carried through the full member.
6) What is the exact part number to order this Eaton B-Line strut channel?
Order it as Eaton B-Line B52A-240GRN. That single part number covers the back-to-back welded B52 channel, 12 gauge steel, 240 in long, in the DURA GREEN finish. There is one configuration, so no length or finish suffix needs to be added.
How fast can I get the B-LINE B52A-240GRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B52A-240GRN come with a warranty?
Absolutely. The B-LINE B52A-240GRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B52A-240GRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B52A-240GRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.