Eaton B-Line series strut back-to-back welded channel, .81" channel height, 240" channel length, 1.62" channel width, Steel, 14 Gauge, B54 channel type, DURA GREEN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Channel Type:
- B54
- Material Gauge:
- 14 Gauge
- Product Height:
- .81 in
- Product Length Depth:
- 240 in
- Product Weight:
- 40.64 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Finish:
- DURA GREEN
- Product Material:
- Steel
- Product Length:
- 240 in
B-LINE B54A-240GRN – Frequently Asked Questions
1) Will standard 1-5/8 inch strut nuts and fittings fit the B-Line B54A channel?
Yes. The B54A is 1.62 inches wide, which is the nominal 1-5/8 inch strut profile, so 1-5/8 inch channel nuts, spring nuts, post bases, clamps and pipe straps built for that profile engage the slot. Note the height is .81 inches, the shallow (half height) section, so fittings that wrap the full 1-5/8 inch deep channel will not seat.
2) What does back-to-back welded channel mean on the B54 strut, and when would I use it instead of single channel?
Back-to-back welded means two channel sections are joined spine to spine and factory welded, giving slots facing opposite directions on both faces. Use it where you need to hang or brace off two sides of the same member, or where a single stick of strut would deflect too much over the span, like trapeze runs and free standing pipe racks. For simple wall mounted single runs of conduit, a single channel section is the cheaper, lighter choice.
3) Is DURA GREEN finish on this B-Line strut suitable for damp or outdoor locations?
DURA GREEN is a coated finish on 14 gauge steel channel. Treat it as a painted/coated product for interior and protected mechanical spaces. For direct weather exposure, wash-down, or corrosive process areas, spec a hot dip galvanized or stainless channel instead rather than assuming a coated green finish will hold up.
4) Does the B54A-240GRN strut come with mounting hardware or nuts?
No. The B54A-240GRN is the bare 240 inch welded channel only. Channel nuts, bolts, washers, brackets, end caps and any pipe or conduit clamps are ordered separately, so build those into the takeoff before the crew gets to site.
5) What is the exact part number to order this Eaton B-Line green welded strut?
Order it as B54A-240GRN from Eaton's B-Line series. The B54 designates the channel type, 240 is the length in inches, and GRN is the DURA GREEN finish.
How fast can I get the B-LINE B54A-240GRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B54A-240GRN come with a warranty?
Absolutely. The B-LINE B54A-240GRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B54A-240GRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B54A-240GRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.