You may also like
B-Line B22KO6-240HDG Eaton series strut channel, 1.62" channel height, 240" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B22 channel type, Hot-dipped galvanized
Model: BLN-B22KO6-240HDG
Eaton B-Line series strut channel, 1.62" channel height, 240" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B22 channel type, Hot-dipped galvanized
B-LINE
$138.15
$119.59
B-Line B22S-120HDG Eaton series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, S hole pattern, B22 channel type, Hot-dipped galvanized
Model: BLN-B22S-120HDG
Eaton B-Line series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, S hole pattern, B22 channel type, Hot-dipped galvanized
B-LINE
$90.08
$54.01
B-Line Eaton series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B22 channel type
Model: BLN-B22KO6-120GLV
Eaton B-Line series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B22 channel type, Pre-galvanized
B-LINE
$8,044.77
B-Line B22KO6-120GRN Eaton series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B22 channel type, DURA GREEN
Model: BLN-B22KO6-120GRN
Eaton B-Line series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B22 channel type, DURA GREEN
B-LINE
$111.02
$82.94
B-Line Eaton series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, 12 Gauge steel, B22 channel, Hot-dipped galvanized
Model: BLN-B22-120HDG
Eaton B-Line series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, 12 Gauge steel, B22 channel, Hot-dipped galvanized
B-LINE
$5,410.46
Eaton B-Line series strut channel, 1.62" channel height, 120" channel length, 1.62" channel width, Steel, 12 Gauge, K06 Hole pattern, B22 channel type, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Channel Type:
- B22
- Hole Pattern:
- K06
- Material Gauge:
- 12 Gauge
- Product Height:
- 1.62 IN
- Product Length Depth:
- 120 IN
- Product Weight:
- 19 LB
- Product Width:
- 1.62 IN
- Department:
- Electrical
- Product Finish:
- Hot-dipped galvanized
- Product Material:
- Steel
B-LINE B22KO6-120HDG – Frequently Asked Questions
1) Is the B-Line B22 strut channel 1-5/8 inch square, and will standard strut nuts and fittings fit it?
The B22KO6-120HDG measures 1.62 inches in both channel height and channel width, which is the 1-5/8 inch square strut profile. Anything built for 1-5/8 inch strut, spring nuts, channel nuts, beam clamps, post bases, will seat in the open slot the same way it does on any B22 section.
2) Can this hot-dipped galvanized strut channel be used outdoors or in a wet environment?
Hot-dipped galvanized is the finish on this 12 gauge steel channel, which is the coating specified for exterior, damp and washdown locations, rooftop equipment supports, parking structures and unconditioned mechanical spaces. It gives heavier zinc coverage than pre-galvanized (electro-galvanized) strut, which is the indoor-only option. Field cuts and drilled holes expose bare steel, so touch them up with a cold galvanizing compound.
3) What is the difference between B22 back-to-back strut and a single 1-5/8 channel?
B22 is the back-to-back (welded double) configuration built from two 1-5/8 inch channels, so it carries slot openings on two opposing faces rather than one. That lets you hang or brace from both sides, which is why it gets used for trapeze supports, freestanding racks and posts where a single channel would only give you one working face. If you only need fittings on one side, a single 1-5/8 inch channel is the lighter and cheaper pick.
4) What does the K06 hole pattern mean on B-Line strut?
K06 is a knockout pattern, so the back of the channel comes with pre-formed knockouts on roughly 6 inch spacing rather than being solid or fully slotted. You punch out only the ones you need for bolting the strut to structure or for running threaded rod through the back, and the rest stay closed. If your job calls for continuous slots along the back for infinite adjustment, that is a different hole pattern, not K06.
5) What is the exact part number I should order to match existing B-Line strut on my job?
The manufacturer part number is B22KO6-120HDG from Eaton's B-Line series. Read it as: B22 back-to-back channel, KO6 knockout pattern, 120 inch length, HDG hot-dipped galvanized. If the strut already on the job is marked B22 but with a different finish or hole suffix, the profile still matches and fittings interchange, only the coating or back-hole layout differs.
How fast can I get the B-LINE B22KO6-120HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B22KO6-120HDG come with a warranty?
Absolutely. The B-LINE B22KO6-120HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B22KO6-120HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B22KO6-120HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.