Eaton B-Line series strut fittings and accessories, 1.62" Height, 1.62" Length, 1.62" Width, .17lbs, Steel, No twisr square washer, Hole size 9/16 in diameter | Bolt size 1/2 in, Stainless steel type 316
Manufacturer Resources
Product Specs
- Bolt Thread Rod Size:
- 1/2"
- Certifications:
- Not Applicable
- Product Height:
- 1.62 in
- Product Length Depth:
- 1.62 in
- Product Weight:
- .17 lb
- Product Width:
- 1.62 in
- Special Features:
- Hole size 9/16 in diameter
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- No twist square washer
- Product Finish:
- Stainless steel type 316
- Product Details:
- No twist square washer
- Product Material:
- Steel
- Product Length:
- 1.62 in
B-LINE B202DSS6 – Frequently Asked Questions
1) Is the B-Line B202DSS6 washer stainless, and will it hold up outdoors or in a wet area?
It is Type 316 stainless steel, the grade normally specified for coastal, wash-down, and chemical exposure rather than dry indoor work. That makes it a match for rooftop, marine-air, water treatment, and food-processing runs where plated steel would rust out.
2) What does a no-twist square washer actually do on a strut installation?
It keeps the fastened part from rotating as you torque the bolt. The square shape registers against the channel so the hanger, clamp, or bracket stays square instead of spinning out of alignment while you tighten. That is the whole point of the B202DSS6 versus a plain round flat washer.
3) Should I use 316 stainless hardware with the B202DSS6, or can I mix in plated steel bolts?
Match the bolt to the washer. Pairing 316 stainless washers with zinc-plated or galvanized bolts gives you dissimilar metals at the joint and the plated fastener corrodes first, which defeats the reason you specified stainless. Order 1/2 inch stainless bolts and channel nuts to go with it.
4) Is the B-Line B202DSS6 sold as a complete strut fitting, or just the washer?
Just the washer. The B202DSS6 is a single no-twist square washer for 1/2 inch hardware; the bolt, the channel nut, and the strut itself are all ordered separately.
5) What is the exact part number to order for the Eaton B-Line 316 stainless 1/2 inch square washer?
Order it as B202DSS6, Eaton B-Line series. The DSS6 suffix is what identifies the Type 316 stainless version, so do not drop it when you spec the part.
How fast can I get the B-LINE B202DSS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B202DSS6 come with a warranty?
Absolutely. The B-LINE B202DSS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B202DSS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B202DSS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.