You may also like
B-Line B166-46-22ZN Eaton series strut fittings and accessories, 1.62" Height, 7.24" Length, 1.68" Width, .79lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B22, B24, B26, Electro-plated
Model: BLN-B166-46-22ZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 7.24" Length, 1.68" Width, .79lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B22, B24, B26, Electro-plated
B-LINE
$175.67
$169.74
B-Line B166-46-52ZN Eaton series strut fittings and accessories, .81" Height, 7.24" Length, 1.68" Width, .61lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B22, B24, B26, Electro-plated
Model: BLN-B166-46-52ZN
Eaton B-Line series strut fittings and accessories, .81" Height, 7.24" Length, 1.68" Width, .61lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B22, B24, B26, Electro-plated
B-LINE
$151.84
$136.94
B-Line Eaton series strut fittings and accessories, 1.62" Height, 7.24" Length, 1.68" Width, .91lbs, Steel,Four hole splice clevis, Thickness 7/32 in,
Model: BLN-B166-22YZN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 7.24" Length, 1.68" Width, .91lbs, Steel,Four hole splice clevis, Thickness 7/32 in, Fits channel type B22, B24, B26, Yellow zinc...
B-LINE
$14,807.87
B-Line B166-42ZN Eaton series strut fittings and accessories, 1" Height, 7.24" Length, 1.68" Width, 0.75lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B42, Electro-plated
Model: BLN-B166-42ZN
Eaton B-Line series strut fittings and accessories, 1" Height, 7.24" Length, 1.68" Width, 0.75lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B42, Electro-plated
B-LINE
$131.77
$109.94
B-Line Eaton series strut fittings and accessories, 1.62" Height, 7.24" Length, 1.68" Width, .91lbs, Steel, Four hole splice clevis, Thickness 7/32 in
Model: BLN-B166-22GRN
Eaton B-Line series strut fittings and accessories, 1.62" Height, 7.24" Length, 1.68" Width, .91lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B22, B24, B26, DURA GREEN
B-LINE
$13,922.53
Eaton B-Line series strut fittings and accessories, 1.62" Height, 7.24" Length, 1.68" Width, .91lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B22, B24, B26, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- For Channel Type:
- Fits channel type B22, B24, B26
- Material Gauge:
- 7/32"
- Product Height:
- 1.62 in
- Product Length Depth:
- 7.24 in
- Product Weight:
- .91 lb
- Product Width:
- 1.68 in
- Special Features:
- 1clevis,4 1/4-20 flat screws, 4 pcs. N224WO nuts
- Department:
- Electrical
- Product Group:
- Connectors & Adapters
- Product Subgroup:
- Splice Components
- Product Type:
- Four hole splice clevis
- Product Finish:
- Electro-plated
- Product Details:
- Four hole splice clevis
- Product Material:
- Steel
- Product Length:
- 7.24 in
B-LINE B166-22ZN – Frequently Asked Questions
1) Does the B166-22ZN come with the bolts and nuts, or do I need to order channel nuts separately?
Hardware is included. Each B166-22ZN ships as one clevis with four 1/4-20 flat head screws and four N224WO channel nuts, so you have the full fastener set for a four hole splice out of the box. No separate channel nut order is needed for the splice itself.
2) Is a zinc electro-plated strut splice OK for outdoor or damp locations?
The B166-22ZN is steel with an electro-plated finish. Electro-plated zinc is a thin sacrificial coating intended for dry indoor service, mechanical rooms, and covered areas. For rooftops, exterior runs, wash-down areas or corrosive environments, specify a hot-dip galvanized or stainless version of the fitting instead.
3) What is the difference between a splice clevis and a flat splice plate for joining strut?
A flat plate sits on one face of the channel and only ties the joint on that single side. The B166-22ZN is a clevis, so it wraps the channel and engages more than one face, which resists twisting at the joint far better than a flat plate. Use the clevis where the splice carries bending or torsional load, such as mid-span joints in a trapeze run; a flat plate is fine for light, non-structural continuations.
4) What part number do I order and what size wrench do the fasteners take?
Order by manufacturer part number B166-22ZN from Eaton B-Line. The supplied fasteners are 1/4-20 flat head screws into N224WO channel nuts, so you are working with a standard 7/16 inch hex on the nut side and a 1/4-20 driver on the screw.
How fast can I get the B-LINE B166-22ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B166-22ZN come with a warranty?
Absolutely. The B-LINE B166-22ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B166-22ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B166-22ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.