Eaton B-Line series strut fittings and accessories, 1.62" Height, 7.24" Length, 1.68" Width, .91lbs, Steel, Four hole splice clevis, Thickness 7/32 in, Fits channel type B22, B24, B26, DURA GREEN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- For Channel Type:
- Fits channel type B22, B24, B26
- Material Gauge:
- 7/32"
- Product Height:
- 1.62 in
- Product Length Depth:
- 7.24 in
- Product Weight:
- .91 lb
- Product Width:
- 1.68 in
- Special Features:
- 1clevis,4 1/4-20 flat screws, 4 pcs. N224WO nuts
- Department:
- Electrical
- Product Group:
- Connectors & Adapters
- Product Subgroup:
- Splice Components
- Product Type:
- Four hole splice clevis
- Product Finish:
- DURA GREEN
- Product Details:
- Four hole splice clevis
- Product Material:
- Steel
B-LINE B166-22GRN – Frequently Asked Questions
1) What strut channel does the B-Line B166-22GRN four hole splice clevis fit?
The B166-22GRN splice clevis fits B-Line channel types B22, B24 and B26. If your run is a different profile, this is not the fitting for it.
2) Does the B166-22GRN splice clevis come with the hardware to install it, or do I order screws separately?
Hardware is included: the clevis ships with four 1/4-20 flat head screws and four N224WO channel nuts. You do not need to order fasteners separately for a standard splice.
3) How much room does a four hole splice clevis need along the strut run?
Plan for about 7.24 inches of length along the channel, with the fitting 1.68 inches wide and 1.62 inches high. On a four hole pattern the screws spread across that full 7.24 inch footprint, so you need clear channel either side of the joint, free of clamps or hangers.
4) How thick is the steel on the B-Line B166 splice clevis?
The material is 7/32 inch steel. That is heavier plate than a typical flat splice plate, which is what lets the clevis carry a moment across the joint rather than just holding two pieces in line.
5) Should I use a splice clevis or a flat splice plate to join two lengths of strut?
A clevis wraps the channel and picks up four 1/4-20 screws into channel nuts, so it holds alignment on both faces of the joint. A flat plate bolts to one face only and is better where clearance is tight against a wall or another member. For a continuous trapeze or rack run where the joint carries load, the clevis is the one to use.
6) What is the DURA GREEN finish on this B-Line strut splice, and where can I use it?
DURA GREEN is B-Line's coated steel finish, applied over the steel body of this four hole splice clevis. It is a coating over steel rather than stainless, so treat it as a painted/coated carbon steel part when you are deciding between indoor and exposed locations.
How fast can I get the B-LINE B166-22GRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B166-22GRN come with a warranty?
Absolutely. The B-LINE B166-22GRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B166-22GRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B166-22GRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.