B-Line B333-3ZN Eaton series s...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$206.39
B-Line B333-3ZN Eaton series strut fittings and accessories, 1.85" Height, 10.37" Length, 1.62" Width, 1.35lbs, Steel, Slot size 9/16 in X 1-1/2 in, Slotted three hole u-support, Electro-plated

B-Line B333-3ZN Eaton series strut fittings and accessories, 1.85" Height, 10.37" Length, 1.62" Width, 1.35lbs, Steel, Slot size 9/16 in X 1-1/2 in, Slotted three hole u-support, Electro-plated

(No reviews yet) Write a Review

Model: B333-3ZN
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$206.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut fittings and accessories, 1.85" Height, 10.37" Length, 1.62" Width, 1.35lbs, Steel, Slot size 9/16 in X 1-1/2 in, Slotted three hole u-support, Electro-plated

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Product Height:
1.85 in
Product Length Depth:
10.37 in
Product Weight:
1.35 lb
Product Width:
1.62 in
Special Features:
Slot size 9/16 in X 1-1/2 in
Department:
Electrical
Product Group:
Clamps & Supports
Product Subgroup:
Supports
Product Type:
Slotted three hole u-support
Product Finish:
Electro-plated
Product Details:
Slotted three hole u-support
Product Material:
Steel

B-LINE B333-3ZN – Frequently Asked Questions

1) What size hardware do the slots on the B-Line B333-3ZN take?
Each slot on the B333-3ZN measures 9/16 inch by 1-1/2 inch. The 9/16 inch width takes standard 1/2 inch strut bolts and channel nuts, and the 1-1/2 inch length gives you adjustment along the slot so you can shift the fitting rather than re-drilling when a hole does not line up.
2) Will the B-Line B333-3ZN u-support fit standard 1-5/8 inch strut?
Yes. At 1.62 inches wide the B333-3ZN matches the 1-5/8 inch nominal width of standard strut channel, so it sits over or against the channel as a U-support without having to modify the run. Its 10.37 inch length spans the strut and gives you the outer holes to land bolts on either side.
3) What is the Eaton B-Line B333-3ZN u-support and what does it do?
The B333-3ZN is a slotted three hole u-support, part of the Eaton B-Line strut fitting line. It is a steel U-shaped bracket with three slotted holes used to support and brace strut, conduit runs and equipment. Overall it measures 10.37 inches long, 1.85 inches high and 1.62 inches wide, and weighs 1.35 pounds.
4) Is the electro-plated finish on the B333-3ZN suitable for outdoor or wet locations?
The B333-3ZN carries an electro-plated zinc finish on steel, which is a dry indoor finish. It handles normal indoor mechanical rooms, ceilings and equipment rooms fine. For exterior runs, wash-down areas, or corrosive environments, specify a hot dip galvanized or stainless version of the fitting instead.
5) Does the B333-3ZN come with bolts and channel nuts?
No. The B333-3ZN is supplied as the bare steel u-support only. Order the 1/2 inch strut bolts, channel nuts and washers separately to suit the slot size, which is 9/16 inch by 1-1/2 inch.
6) What part number do I order for the B-Line three hole slotted u-support in zinc?
Order Eaton B-Line B333-3ZN. The ZN suffix is the electro-plated zinc finish, and the fitting is supplied as a single piece in that one configuration.
7) How much does the B-Line B333-3ZN weigh for overhead load calculations?
Each B333-3ZN u-support weighs 1.35 pounds. That is the dead load of the fitting itself, which matters when you are tallying trapeze or hanger weight on a long overhead run; it does not include bolts, nuts or the strut it mounts to.
How fast can I get the B-LINE B333-3ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B333-3ZN come with a warranty?
Absolutely. The B-LINE B333-3ZN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B333-3ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B333-3ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!