Eaton B-Line series strut fittings and accessories, 1.85" Height, 7.5" Length, 1.62" Width, 1.03lbs, Steel, Slot size 9/16 in X 1-1/2 in, Slotted three hole u-support, Yellow zinc chromate
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 1.85 in
- Product Length Depth:
- 7.5 in
- Product Weight:
- 1.03 lb
- Product Width:
- 1.62 in
- Special Features:
- Slot size 9/16 in X 1-1/2 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Slotted three hole u-support
- Product Finish:
- Yellow zinc chromate
- Product Details:
- Slotted three hole u-support
- Product Material:
- Steel
B-LINE B333-1YZN – Frequently Asked Questions
1) What slot size does the B333-1YZN have, and will 1/2 inch strut bolts pass through it?
The slots are 9/16 in x 1-1/2 in. A 9/16 inch slot width clears 1/2 inch strut hardware, and the 1-1/2 inch slot length gives you adjustment along each hole position rather than a fixed hole center, which is what lets you pick up an existing bolt pattern that is slightly off.
2) Will the B333-1YZN clear a 1-5/8 inch strut channel?
At 1.62 inches wide, the B333-1YZN matches the standard 1-5/8 inch strut channel width, so it sits flush on the face of a 1-5/8 inch run rather than overhanging it. Height is 1.85 inches, which is what determines the standoff from the channel face.
3) What is the B-Line B333-1YZN u-support used for?
The B333-1YZN is a slotted three hole u-support, a steel strut fitting used to bracket off a strut run or bridge between two points with bolt-through connections at three hole positions. It measures 7.5 inches long, 1.85 inches high and 1.62 inches wide, and weighs 1.03 lb, so it handles as a light one-hand fitting during layout.
4) Is the yellow zinc chromate finish on the B333-1YZN suitable for outdoor use?
Yellow zinc chromate is a plated finish intended for dry indoor and protected service. On a steel fitting it resists handling corrosion and incidental moisture, but for exterior, wash-down or corrosive areas you want a hot dip galvanized or stainless equivalent instead of the YZN plating.
5) Does the B-Line B333-1YZN come with bolts and channel nuts?
The B333-1YZN is the steel u-support fitting only. Strut nuts, bolts and washers are ordered separately, so plan on 1/2 inch strut hardware to match the 9/16 inch slots at each of the three hole positions.
6) What is the exact part number to order this Eaton B-Line u-support?
Order it as B-Line B333-1YZN. The B333 is the slotted three hole u-support and the YZN suffix designates the yellow zinc chromate plated finish.
How fast can I get the B-LINE B333-1YZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B333-1YZN come with a warranty?
Absolutely. The B-LINE B333-1YZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B333-1YZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B333-1YZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.