Eaton B-Line series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .54lbs, Steel, Left hand three hole single corner wing fitting, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 2.06 in
- Product Length Depth:
- 3.5 in
- Product Weight:
- .54 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Left hand three hole single corner wing fitting
- Product Finish:
- Electro-plated
- Product Details:
- Left hand three hole single corner wing fitting
- Product Material:
- Steel
B-LINE B267LZN – Frequently Asked Questions
1) Is the B-Line B267LZN strut fitting left hand or right hand?
The B267LZN is the left hand version of the three hole single corner wing fitting. Handing matters on wing fittings because the wing (the offset leg) turns one way only, so a left hand part will not mirror into a right hand corner. Confirm which way your corner breaks before ordering, and order the right hand counterpart if the wing needs to face the other side.
2) Is the B267LZN fitting galvanized or plated, and can I use it outdoors?
It is steel with an electro-plated finish. Electro-plating is a thin zinc coating suited to dry indoor and protected environments. For exposed exterior runs, wash-down areas, or corrosive atmospheres, specify a hot dip galvanized or stainless equivalent instead.
3) Does the B267LZN come with the strut nuts and bolts I need?
The B267LZN is supplied as the fitting only, a single corner wing bracket with three holes. You order strut nuts, bolts and washers separately, sized to the channel you are attaching to. Plan on hardware for each of the three holes you intend to use.
4) What is a three hole corner wing fitting used for on a strut run?
It ties two strut members together at a corner where the connection has to step off to one side rather than lie flat in the same plane. The wing carries the offset leg and the three holes give you bolt positions for bracing conduit racks, pipe supports and equipment frames. If your two struts meet flush in the same plane, a flat angle or flat plate fitting is the simpler choice.
5) What is the manufacturer part number for this Eaton B-Line corner wing fitting?
Order it as B267LZN from Eaton's B-Line series of strut fittings and accessories. The L in the number is the left hand designation.
How fast can I get the B-LINE B267LZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B267LZN come with a warranty?
Absolutely. The B-LINE B267LZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B267LZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B267LZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.