You may also like
B-Line Eaton series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .71lbs, Aluminium, Four hole double corner wing fitting, 9
Model: BLN-B119AL
Eaton B-Line series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .71lbs, Aluminium, Four hole double corner wing fitting, 90 deg, Thickness 1/4 in, Aluminum
B-LINE
$12,962.84
B-Line B119GRN Eaton series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .71lbs, Steel, Four hole double corner wing fitting, 90 deg, Thickness 1/4 in, DURA GREEN
Model: BLN-B119GRN
Eaton B-Line series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .71lbs, Steel, Four hole double corner wing fitting, 90 deg, Thickness 1/4 in, DURA GREEN
B-LINE
$138.18
$105.16
B-Line B119SS4 Eaton series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .71lbs, Steel, Four hole double corner wing fitting, 90 deg, Thickness 1/4 in, Stainless steel type 304
Model: BLN-B119SS4
Eaton B-Line series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .71lbs, Steel, Four hole double corner wing fitting, 90 deg, Thickness 1/4 in, Stainless steel type 304
B-LINE
$300.03
$296.85
B-Line Eaton series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .54lbs, Steel, Left hand three hole single corner wing fit
Model: BLN-B267LGRN
Eaton B-Line series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .54lbs, Steel, Left hand three hole single corner wing fitting, DURA GREEN
B-LINE
$10,506.65
B-Line Eaton series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .54lbs, Steel, Right hand three hole single corner wing fi
Model: BLN-B267RZN
Eaton B-Line series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .54lbs, Steel, Right hand three hole single corner wing fitting, Electro-plated
B-LINE
$10,028.30
Eaton B-Line series strut fittings and accessories, 2.06" Height, 3.5" Length, 1.62" Width, .71lbs, Steel, Four hole double corner wing fitting, 90 deg, Thickness 1/4 in, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 2.06 in
- Product Length Depth:
- 3.5 in
- Product Weight:
- .71 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Four hole double corner wing fitting, 90 deg
- Product Finish:
- Electro-plated
- Product Details:
- Four hole double corner wing fitting, 90 deg
- Product Material:
- Steel
- Product Length:
- 3.5 in
B-LINE B119ZN – Frequently Asked Questions
1) Is the B119ZN strut fitting okay for outdoor or wet locations?
No, treat it as an indoor, dry location part. The finish is electro-plated zinc over steel, which is a light coating meant for protected interior environments. For exterior, damp, or corrosive areas you want a hot-dip galvanized or stainless fitting instead.
2) What does the B-Line B119ZN corner wing fitting actually do in a strut assembly?
The B119ZN is a four hole double corner wing fitting that joins two lengths of strut channel at 90 degrees. The wings wrap the corner so bolts pull through four holes, two into each run, instead of relying on a single flat plate face. Typical use is squaring up a strut frame, trapeze support, or equipment rack in an electrical or mechanical run.
3) What is the manufacturer part number for this Eaton B-Line corner wing fitting?
Order it as B-Line B119ZN. The ZN suffix is the electro-plated zinc version of the B119 four hole double corner wing fitting.
4) Should I use a four hole corner wing fitting or a flat 90 degree angle bracket on my strut frame?
Pick the wing fitting when the corner carries real load or has to stay square. The double wing design puts two bolts into each leg of the joint, which resists twist far better than a flat angle with one bolt per side. A simple flat 90 degree plate is fine for light bracing or a non-structural hanger, and it sits flatter when clearance is tight, since this fitting stands 2.06 inches off the face.
5) Will the B119ZN fitting match the other B-Line strut hardware already in my building?
Yes, if the existing runs are standard B-Line channel with zinc plated fittings. The B119ZN is a zinc electro-plated steel part from the same Eaton B-Line strut fittings and accessories family, so it bolts to the same channel slots and matches the finish of other plated fittings on the job. It will look different next to hot-dip galvanized hardware.
How fast can I get the B-LINE B119ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B119ZN come with a warranty?
Absolutely. The B-LINE B119ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B119ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B119ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.