You may also like
B-Line B151ZN Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 52-1/2 deg, Thickness 1/4 in, Electro-plated
Model: BLN-B151ZN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 52-1/2 deg, Thickness 1/4 in, Electro-plated
B-LINE
$89.55
$47.50
B-Line B147ZN Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 82-1/2 deg, Thickness 1/4 in, Electro-plated
Model: BLN-B147ZN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 82-1/2 deg, Thickness 1/4 in, Electro-plated
B-LINE
$89.55
$47.50
B-Line B148ZN Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 75deg, Thickness 1/4 in, Electro-plated
Model: BLN-B148ZN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 75deg, Thickness 1/4 in, Electro-plated
B-LINE
$89.55
$47.50
B-Line B149ZN Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 67-1/2 deg, Thickness 1/4 in, Electro-plated
Model: BLN-B149ZN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 67-1/2 deg, Thickness 1/4 in, Electro-plated
B-LINE
$89.55
$47.50
B-Line B150ZN Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 60 deg, Thickness 1/4 in, Electro-plated
Model: BLN-B150ZN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 60 deg, Thickness 1/4 in, Electro-plated
B-LINE
$89.55
$47.50
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 37-1/2 deg, Thickness 1/4 in, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 2.37 in
- Product Length Depth:
- 3.25 in
- Product Weight:
- .63 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Two hole open angle, 37-1/2 deg
- Product Finish:
- Electro-plated
- Product Details:
- Two hole open angle, 37-1/2 deg
- Product Material:
- Steel
B-LINE B152ZN – Frequently Asked Questions
1) What angle does the B-Line B152ZN open angle fitting hold?
The B152ZN is a two hole open angle fitting set at 37-1/2 degrees. It's a fixed-angle bracket, so the angle is not adjustable. If your strut run needs a different pitch, you need a different angle fitting or an adjustable hinge-type connector rather than trying to bend this one, since it's 1/4 inch thick steel.
2) How many bolts do I need to install a B152ZN angle bracket?
Two. The B152ZN is a two hole fitting, so one hole lands on each leg of the connection and you need two channel nuts and bolts to make it up. Hardware is not part of the fitting itself, so order strut nuts and bolts separately to suit your channel.
3) Is the electro-plated finish on the B152ZN suitable for outdoor or wet locations?
Electro-plated zinc on steel is a light coating meant for dry indoor service, mechanical rooms, ceiling spaces and the like. For exterior work, wash-down areas or corrosive environments, step up to a hot-dip galvanized or stainless version of the same angle fitting instead of the ZN.
4) What is the correct part number to order this Eaton B-Line 37-1/2 degree angle fitting?
Order it as B152ZN. That is the Eaton B-Line manufacturer part number for the two hole open angle at 37-1/2 degrees in the electro-plated finish, and it's the only configuration this part number covers.
5) Does the B152ZN angle fitting carry a UL listing or other certification?
No certification applies to the B152ZN. It's a plain steel strut angle fitting, so any code approval on your installation rests on the channel system and the seismic or support design, not on the individual bracket.
6) Is a 1/4 inch thick angle fitting heavy enough for pipe and conduit racks?
The B152ZN is formed from 1/4 in steel, which is the standard heavy gauge B-Line uses for structural strut fittings rather than light sheet accessories. For the load rating on a specific rack, work from Eaton's published load table for the fitting and the channel you're pairing it with, since capacity depends on bolt size and connection geometry as much as on the bracket.
How fast can I get the B-LINE B152ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B152ZN come with a warranty?
Absolutely. The B-LINE B152ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B152ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B152ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.