You may also like
B-Line B152ZN Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 37-1/2 deg, Thickness 1/4 in, Electro-plated
Model: BLN-B152ZN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 37-1/2 deg, Thickness 1/4 in, Electro-plated
B-LINE
$89.55
$47.50
B-Line B147ZN Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 82-1/2 deg, Thickness 1/4 in, Electro-plated
Model: BLN-B147ZN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 82-1/2 deg, Thickness 1/4 in, Electro-plated
B-LINE
$89.55
$47.50
B-Line B151ZN Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 52-1/2 deg, Thickness 1/4 in, Electro-plated
Model: BLN-B151ZN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 52-1/2 deg, Thickness 1/4 in, Electro-plated
B-LINE
$89.55
$47.50
B-Line B149ZN Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 67-1/2 deg, Thickness 1/4 in, Electro-plated
Model: BLN-B149ZN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 67-1/2 deg, Thickness 1/4 in, Electro-plated
B-LINE
$89.55
$47.50
B-Line B148ZN Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 75deg, Thickness 1/4 in, Electro-plated
Model: BLN-B148ZN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 75deg, Thickness 1/4 in, Electro-plated
B-LINE
$89.55
$47.50
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 60 deg, Thickness 1/4 in, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 2.37 in
- Product Length Depth:
- 3.25 in
- Product Weight:
- .63 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Two hole open angle, 60 deg
- Product Finish:
- Electro-plated
- Product Details:
- Two hole open angle, 60 deg
- Product Material:
- Steel
B-LINE B150ZN – Frequently Asked Questions
1) What is the Eaton B-Line B150ZN fitting used for?
The B150ZN is a two hole open angle fitting bent to 60 degrees, used to join strut channel runs at an angle rather than a square corner. Each leg carries one bolt hole, so it ties two channel pieces together at that fixed 60 degree relationship. It is steel with an electro-plated finish and weighs .63 lb.
2) Does the B150ZN come with the bolts and channel nuts?
No. The B150ZN is the angle bracket alone, with two bolt holes. You order the strut nuts, bolts, and washers separately to suit the channel you are fastening into.
3) How thick is the steel on the B150ZN angle bracket?
1/4 inch steel. That is a heavier plate than the light gauge fittings used for conduit hangers, which is what lets an open angle carry load across the bend instead of flexing at it.
4) What are the dimensions of the B-Line B150ZN 60 degree angle fitting?
It measures 3.25 inches in length, 2.37 inches in height, and 1.62 inches in width, at 1/4 inch material thickness. Use the 1.62 inch width to confirm it seats on your channel face before ordering.
5) Is the electro-plated finish on the B150ZN suitable for outdoor or wet locations?
Electro-plated zinc is a dry indoor finish. It handles normal interior mechanical and electrical rooms fine, but for exterior, wash-down, or corrosive environments you want a hot dip galvanized or stainless equivalent of the same open angle instead.
6) Can the angle on the B150ZN be adjusted on site?
No. This is a fixed 60 degree open angle, formed in 1/4 inch steel. If your run needs a variable angle, you need a swivel or adjustable hinge connector rather than this fitting.
7) What part number do I order for the B-Line 60 degree two hole open angle?
Order by manufacturer part number B150ZN, Eaton B-Line series. There is one configuration, the electro-plated steel version, so there is no finish or size suffix to specify.
How fast can I get the B-LINE B150ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B150ZN come with a warranty?
Absolutely. The B-LINE B150ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B150ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B150ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.