You may also like
B-Line B150SS4 Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 60 deg, Thickness 1/4 in, Stainless steel type 304
Model: BLN-B150SS4
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 60 deg, Thickness 1/4 in, Stainless steel type 304
B-LINE
$181.29
$156.05
B-Line Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 82-1/2 deg, Thickness
Model: BLN-B147GRN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 82-1/2 deg, Thickness 1/4 in, DURA GREEN
B-LINE
$4,936.13
B-Line Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 75deg, Thickness 1/4
Model: BLN-B148GRN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 75deg, Thickness 1/4 in, DURA GREEN
B-LINE
$4,936.13
B-Line Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 52-1/2 deg, Thickness
Model: BLN-B151GRN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 52-1/2 deg, Thickness 1/4 in, DURA GREEN
B-LINE
$4,936.13
B-Line Eaton series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 67-1/2 deg, Thickness
Model: BLN-B149GRN
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 67-1/2 deg, Thickness 1/4 in, DURA GREEN
B-LINE
$4,936.13
Eaton B-Line series strut fittings and accessories, 2.37" Height, 3.25" Length, 1.62" Width, .63lbs, Steel, Two hole open angle, 82-1/2 deg, Thickness 1/4 in, Stainless steel type 316
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 2.37 in
- Product Length Depth:
- 3.25 in
- Product Weight:
- .63 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Two hole open angle, 82-1/2 deg
- Product Finish:
- Stainless steel type 316
- Product Details:
- Two hole open angle, 82-1/2 deg
- Product Material:
- Steel
- Product Length:
- 3.25 in
B-LINE B147SS6 – Frequently Asked Questions
1) What is the B-Line B147SS6 strut fitting used for?
The B147SS6 is a two hole open angle bracket for strut channel framing, bent to 82-1/2 degrees rather than a square 90. You use it where a run of strut has to pick up a member that is slightly off square, such as a sloped ceiling, a pitched roof deck, or a tapered wall. Two bolt holes tie it into the channel, and the steel is 1/4 inch thick.
2) Is the B147SS6 angle fitting suitable for outdoor or wet, corrosive locations?
Yes. The B147SS6 is type 316 stainless steel, which is the grade specified for coastal, chemical, and washdown environments where plain electro-galvanized fittings rust out. It is a common pick for wastewater plants, food processing, marine work, and rooftop runs. If the job is dry indoor conduit support, a plated carbon steel angle covers it at lower cost.
3) Do the bolts and channel nuts come with the B147SS6 angle?
No. The B147SS6 is the bracket only, with two bolt holes. You order the channel nuts, bolts, and washers separately. On a 316 stainless installation, match the fasteners and spring nuts in 316 stainless as well; mixing plated steel hardware into a stainless fitting puts dissimilar metals together and the fastener corrodes first.
4) Is the B147SS6 the same part as the standard-finish B147 angle?
Same fitting geometry, different material. The SS6 suffix on B147SS6 denotes type 316 stainless steel. A plain B147 in electro-galvanized or pre-galvanized steel is the indoor equivalent. If a spec calls out 316 stainless strut hardware throughout, the galvanized version will not satisfy it.
5) How do I order the right B-Line open angle, and what is the part number?
Order by manufacturer part number B147SS6 from Eaton B-Line. That single number carries the two hole open angle configuration, the 82-1/2 degree bend, the 1/4 inch material, and the type 316 stainless finish, so there is no separate finish or angle option to specify. For a different off-angle or a square corner you need a different B-Line fitting number.
How fast can I get the B-LINE B147SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B147SS6 come with a warranty?
Absolutely. The B-LINE B147SS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B147SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B147SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.