You may also like
B-Line B173ZN Eaton series strut fittings and accessories, 3.31" Height, 3.31" Length, 1.87" Width, .71lbs, Steel, 1-21/32 In center spacing | Channel depth 3-5/16 in, Four hole clevis, Thickness 1/4 in, Electro-plated
Model: BLN-B173ZN
Eaton B-Line series strut fittings and accessories, 3.31" Height, 3.31" Length, 1.87" Width, .71lbs, Steel, 1-21/32 In center spacing | Channel depth 3-5/16 in, Four hole clevis, Thickness 1/4 in,...
B-LINE
$92.73
$57.87
B-Line Eaton series strut fittings and accessories, 3.37" Height, 3.31" Length, 1.62" Width, 1.10lbs, Steel, Four bearing trolley assembly, Electro-pl
Model: BLN-B376ZN
Eaton B-Line series strut fittings and accessories, 3.37" Height, 3.31" Length, 1.62" Width, 1.10lbs, Steel, Four bearing trolley assembly, Electro-plated zinc
B-LINE
$42,795.26
$42,745.26
B-Line Eaton series strut fittings and accessories, 3.37" Height, 3.31" Length, 1.62" Width, .48lbs, Steel, Four bearing trolley assembly, Electro-pla
Model: BLN-B377ZN
Eaton B-Line series strut fittings and accessories, 3.37" Height, 3.31" Length, 1.62" Width, .48lbs, Steel, Four bearing trolley assembly, Electro-plated zinc
B-LINE
$38,314.91
B-Line Eaton series strut fittings and accessories, 3.37" Height, 3.31" Length, 1.62" Width, 8.89lbs, Steel, Four bearing trolley assembly, Electro-pl
Model: BLN-B379ZN
Eaton B-Line series strut fittings and accessories, 3.37" Height, 3.31" Length, 1.62" Width, 8.89lbs, Steel, Four bearing trolley assembly, Electro-plated zinc
B-LINE
$90,271.39
$90,221.39
B-Line Eaton series strut fittings and accessories, 3.31" Height, 4.37" Length, 1.62" Width, .546lbs, Steel, Two hole open angle, 7-1/2 deg, Thickness
Model: BLN-B165GRN
Eaton B-Line series strut fittings and accessories, 3.31" Height, 4.37" Length, 1.62" Width, .546lbs, Steel, Two hole open angle, 7-1/2 deg, Thickness 7/32 in, DURA GREEN
B-LINE
$5,591.77
Eaton B-Line series strut fittings and accessories, 3.31" Height, 3.31" Length, 1.87" Width, .71lbs, Steel, 1-21/32 In center spacing | Channel depth 3-5/16 in, Four hole clevis, Thickness 1/4 in, DURA GREEN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 3.31 in
- Product Length Depth:
- 3.31 in
- Product Weight:
- .71 lb
- Product Width:
- 1.87 in
- Special Features:
- 1-21/32 In center spacing,Channel depth 3-5/16 in
- Department:
- Electrical
- Product Type:
- Four hole clevis
- Product Finish:
- DURA GREEN
- Product Details:
- Four hole clevis
- Product Material:
- Steel
B-LINE B173GRN – Frequently Asked Questions
1) Will the B-Line B173GRN four hole clevis fit 1-5/8 inch strut channel?
Yes. The B173GRN is built around a 3-5/16 in channel depth with 1-21/32 in hole center spacing, so it mates with standard 1-5/8 in wide strut, including back-to-back (double) channel at 3-5/16 in deep. The 1.87 in width lets it straddle the channel and the four holes line up on the strut's standard bolt centers.
2) What does the DURA GREEN finish on the B-Line B173GRN clevis mean for outdoor or wet locations?
DURA GREEN is Eaton B-Line's green epoxy coating over the steel body. It is intended for corrosive and damp service such as wastewater plants, chemical areas and covered exterior runs, where plain electro-zinc would break down. If you are mixing it into an existing run, match it to other DURA GREEN strut and fittings so the coating system stays consistent.
3) How thick is the steel on the B173GRN strut clevis fitting?
Quarter inch. The B173GRN is formed from 1/4 in steel, which is the heavier of the common strut fitting gauges and is what you want on a clevis taking pipe or trapeze load rather than light conduit support.
4) Do bolts or channel nuts come with the B173GRN clevis?
No hardware is included. The B173GRN is the clevis fitting only, so order strut nuts and bolts separately, sized to the 1-21/32 in hole centers and in a finish that matches the DURA GREEN coating if the run is in a corrosive area.
5) What part number do I order for the green four hole strut clevis from B-Line?
The catalog number is B173GRN, Eaton B-Line series. The GRN suffix is the DURA GREEN coating; the same fitting body is cataloged in other B-Line finishes under different suffixes, so quote the full number with the suffix when you order.
How fast can I get the B-LINE B173GRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B173GRN come with a warranty?
Absolutely. The B-LINE B173GRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B173GRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B173GRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.