You may also like
B-Line Eaton series strut fittings and accessories, 3.5" Height, 3.75" Length, 2.06" Width, .76lbs, Steel, Four hole offset bent tee, 90 deg | Right,
Model: BLN-B238RGRN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 3.75" Length, 2.06" Width, .76lbs, Steel, Four hole offset bent tee, 90 deg | Right, DURA GREEN
B-LINE
$9,050.21
B-Line Eaton series strut fittings and accessories, 3.5" Height, 3.75" Length, 2.06" Width, .76lbs, Steel, Four hole offset bent tee, 90 deg | Left, D
Model: BLN-B238LGRN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 3.75" Length, 2.06" Width, .76lbs, Steel, Four hole offset bent tee, 90 deg | Left, DURA GREEN
B-LINE
$9,050.21
B-Line Eaton series strut fittings and accessories, 3.5" Height, 3.75" Length, 2.06" Width, .76lbs, Steel, Four hole offset bent tee, 90 deg | Left, E
Model: BLN-B238LZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 3.75" Length, 2.06" Width, .76lbs, Steel, Four hole offset bent tee, 90 deg | Left, Electro-plated
B-LINE
$8,647.09
B-Line Eaton series strut fittings and accessories, 3.5" Height, 5.37" Length, 2.06" Width, .96lbs, Steel, Five hole offset bent tee, 90 deg, Electro-
Model: BLN-B239ZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 5.37" Length, 2.06" Width, .96lbs, Steel, Five hole offset bent tee, 90 deg, Electro-plated
B-LINE
$14,084.56
B-Line B236RZN Eaton series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Electro-plated
Model: BLN-B236RZN
Eaton B-Line series strut fittings and accessories, 3.5" Height, 2.06" Length, 1.87" Width, .65lbs, Steel, Right hand three hole offset bent angle, 90 deg, Electro-plated
B-LINE
$96.84
$63.66
Eaton B-Line series strut fittings and accessories, 3.5" Height, 3.75" Length, 2.06" Width, .76lbs, Steel, Four hole offset bent tee, 90 deg | Right, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.5 in
- Product Length Depth:
- 3.75 in
- Product Weight:
- .76 lb
- Product Width:
- 2.06 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Four hole offset bent tee, 90 deg,Right
- Product Finish:
- Electro-plated
- Product Details:
- Four hole offset bent tee, 90 deg,Right
- Product Material:
- Steel
- Product Length:
- 3.75 in
B-LINE B238RZN – Frequently Asked Questions
1) What does the B-Line B238RZN strut fitting actually do?
The B238RZN is a four hole offset bent tee that turns a 90 degree corner in a right hand configuration. The offset bend lets the fitting step from one strut plane to another while the four bolt holes tie the two members together, so it is used where a strut run has to branch off at a right angle rather than continue straight. It is a steel fitting with an electro-plated finish.
2) Is the B238RZN a right hand or left hand tee, and does it matter?
It is the right hand version. On an offset bent tee the bend goes to one side only, so a right hand part will not mirror into a left hand condition. If your branch runs the other way off the strut, you need the left hand equivalent instead of this one.
3) Is the electro-plated finish on the B238RZN suitable for outdoor or wet locations?
Electro-plated zinc is a light coating intended for dry indoor use. For exterior runs, mechanical rooms with washdown, or corrosive environments, specify a hot dip galvanized or stainless version of the fitting instead of the electro-plated one.
4) Do I get bolts and channel nuts with the B238RZN tee?
The B238RZN is sold as the steel fitting alone. The four holes are unhardware'd, so order your strut nuts, bolts and washers separately to suit the channel you are attaching to.
5) What is the correct part number to order for this Eaton B-Line offset bent tee?
Order it as B-Line B238RZN. The RZN suffix is the electro-plated steel version of the four hole offset bent tee, right hand. There is one configuration on that number, so no finish or handing option needs to be added to the order.
How fast can I get the B-LINE B238RZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B238RZN come with a warranty?
Absolutely. The B-LINE B238RZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B238RZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B238RZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.