You may also like
B-Line B120ZN Eaton series strut fittings and accessories, 3.93" Height, 3.5" Length, 1.62" Width, 1.10lbs, Steel, Six hole double corner angle, 90 deg, Thickness 1/4 in, Electro-plated
Model: BLN-B120ZN
Eaton B-Line series strut fittings and accessories, 3.93" Height, 3.5" Length, 1.62" Width, 1.10lbs, Steel, Six hole double corner angle, 90 deg, Thickness 1/4 in, Electro-plated
B-LINE
$149.74
$118.74
B-Line B120GRN Eaton series strut fittings and accessories, 3.93" Height, 3.5" Length, 1.62" Width, 1.10lbs, Steel, Six hole double corner angle, 90 deg, Thickness 1/4 in, DURA GREEN
Model: BLN-B120GRN
Eaton B-Line series strut fittings and accessories, 3.93" Height, 3.5" Length, 1.62" Width, 1.10lbs, Steel, Six hole double corner angle, 90 deg, Thickness 1/4 in, DURA GREEN
B-LINE
$154.32
$123.83
B-Line B120HDG Eaton series strut fittings and accessories, 3.93" Height, 3.5" Length, 1.62" Width, 1.10lbs, Steel, Six hole double corner angle, 90 deg, Thickness 1/4 in, Hot-dipped galvanized
Model: BLN-B120HDG
Eaton B-Line series strut fittings and accessories, 3.93" Height, 3.5" Length, 1.62" Width, 1.10lbs, Steel, Six hole double corner angle, 90 deg, Thickness 1/4 in, Hot-dipped galvanized
B-LINE
$182.42
$157.75
B-Line Eaton series strut fittings and accessories, 3.93" Height, 3.5" Length, 1.62" Width, 1.10lbs, Aluminium, Six hole double corner angle, 90 deg,
Model: BLN-B120AL
Eaton B-Line series strut fittings and accessories, 3.93" Height, 3.5" Length, 1.62" Width, 1.10lbs, Aluminium, Six hole double corner angle, 90 deg, Thickness 1/4 in, Aluminum
B-LINE
$15,011.93
B-Line Eaton series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg, DURA GREE
Model: BLN-B232GRN
Eaton B-Line series strut fittings and accessories, 3.93" Height, 1.87" Length, 1.62" Width, .56lbs, Steel, Three hole corner angle, 90 deg, DURA GREEN
B-LINE
$3,341.64
Eaton B-Line series strut fittings and accessories, 3.93" Height, 3.5" Length, 1.62" Width, 1.10lbs, Steel, Six hole double corner angle, 90 deg, Thickness 1/4 in, Yellow zinc chromate
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 3.93 in
- Product Length Depth:
- 3.5 in
- Product Weight:
- 1.1 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Six hole double corner angle, 90 deg
- Product Finish:
- Yellow zinc chromate
- Product Details:
- Six hole double corner angle, 90 deg
- Product Material:
- Steel
B-LINE B120YZN – Frequently Asked Questions
1) What is the Eaton B-Line B120YZN fitting used for?
The B120YZN is a six hole double corner angle bent to 90 degrees, used to tie strut channel members together at a right angle in two planes. Because it is a double corner angle rather than a flat plate, it picks up bolt holes on both legs, so it braces a corner joint instead of just splicing a straight run. It is steel with a yellow zinc chromate finish and weighs 1.1 lb.
2) What are the dimensions of the B120YZN double corner angle?
It measures 3.93 in height, 3.5 in length/depth and 1.62 in width. The 1.62 in width is the key number if you are fitting it against 1-5/8 in strut channel, since the fitting is sized to sit flat on the channel face.
3) Do bolts and channel nuts come with the B-Line B120YZN angle fitting?
No. The B120YZN ships as the six hole corner angle only. You order the strut nuts, hex bolts and washers separately, sized to your channel, and you will need six sets if you bolt through every hole.
4) How thick is the steel on the B-Line B120YZN corner angle?
1/4 inch steel. That is the heavy end of the strut fitting range, so the B120YZN is aimed at load carrying corner connections in a trapeze or rack frame rather than light duty bracketing.
5) Is the yellow zinc chromate finish on this B-Line strut angle suitable for outdoor use?
Yellow zinc chromate is a plated finish intended for dry indoor service, mechanical rooms and covered areas. For exposed exterior runs or wash-down areas, specify a hot dip galvanized or stainless strut fitting instead; the B120YZN is the yellow zinc chromate version.
6) Does the B120YZN strut angle carry a UL or other listing?
Certifications are marked Not Applicable for the B120YZN. It is a structural strut connection fitting, so specify it on the mechanical or support detail rather than against an electrical listing requirement.
How fast can I get the B-LINE B120YZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B120YZN come with a warranty?
Absolutely. The B-LINE B120YZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B120YZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B120YZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.