B-Line Eaton series strut fitt...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$36,875.60
$36,825.60
B-Line Eaton series strut fittings and accessories, 4" Height, 15" Length, 1.62" Width, 3.08lbs, Steel, Bracket, Uniform load capacity 870 Lbs, Hot-di

B-Line Eaton series strut fittings and accessories, 4" Height, 15" Length, 1.62" Width, 3.08lbs, Steel, Bracket, Uniform load capacity 870 Lbs, Hot-di

(No reviews yet) Write a Review

Model: B189HDG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$36,875.60
$36,825.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut fittings and accessories, 4" Height, 15" Length, 1.62" Width, 3.08lbs, Steel, Bracket, Uniform load capacity 870 Lbs, Hot-dipped galvanized

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Product Height:
4 in
Product Length Depth:
15 in
Product Weight:
3.08 lb
Product Width:
1.62 in
Special Features:
2 holes,(1) 9/16 In dia,Hole spacing on top5-5/16"
Department:
Electrical
Product Group:
Mounting Hardware
Product Subgroup:
Brackets
Product Type:
Bracket
Product Finish:
Hot-dipped galvanized
Product Details:
Bracket
Product Material:
Steel

B-LINE B189HDG – Frequently Asked Questions

1) What load can the B-Line B189HDG strut bracket carry?
The B189HDG bracket is rated for a uniform load of 870 lbs. That is a uniform load figure, so a point load hung off one end of the 15 inch leg will not see the same capacity. Size your supports on the uniform rating and keep the load distributed along the bracket.
2) Can the B189HDG bracket be used outdoors or in a wet area?
Yes. It's steel with a hot-dipped galvanized finish, which is the coating normally specified for exterior, damp, and unheated spaces such as rooftops, parking structures, and tunnels. For dry indoor work a plain or electro-galvanized fitting would do the same job, but there's no harm in using the HDG version indoors.
3) What size bolts fit the holes in this B-Line bracket, and how far apart are they?
The bracket has 2 holes, with one of them 9/16 inch diameter, and the hole spacing on the top is 5-5/16 inches. A 9/16 inch hole takes a 1/2 inch bolt or strut nut with clearance, which is the standard channel hardware size. Check that 5-5/16 inch spacing against your existing strut hole pattern before you drill anything.
4) How much space does the B189HDG bracket take up on a strut run?
Overall it measures 4 inches height, 15 inches length/depth, and 1.62 inches width. The 1.62 inch width is the usual 1-5/8 inch channel footprint, so it sits flush on standard 1-5/8 inch strut. Allow for the 15 inch dimension as the projecting leg when you lay out clearance from the wall or structure.
5) What is a B-Line B189HDG actually used for on an electrical job?
It's a steel strut fitting bracket, part of the Eaton B-Line strut fittings and accessories line, used to attach and support strut channel, conduit racks, cable tray, and equipment off walls or structure. Bolted to channel through its 9/16 inch hole, the 15 inch leg gives you a standoff to carry the load away from the mounting surface.
6) Does the B189HDG bracket come with bolts, nuts, or strut channel?
Order the fasteners separately. The B189HDG is the bracket only, so you'll also need channel nuts or spring nuts and 1/2 inch bolts to suit the 9/16 inch hole, plus whatever anchors the mounting surface calls for.
7) Is the B189HDG heavy enough to need two people or extra support to install?
No. It weighs 3.08 lbs, so it's a one-hand install on a ladder. The weight also matters for dead load calculations when you're hanging a long run of brackets off a ceiling or wall trapeze.
8) How do I order the right part, and is there more than one version of this bracket?
There's a single version: model and manufacturer part number B189HDG, the hot-dipped galvanized steel bracket. No finish or size options to pick, so quoting B189HDG gets you the exact item.
How fast can I get the B-LINE B189HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B189HDG come with a warranty?
Absolutely. The B-LINE B189HDG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B189HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B189HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!