Eaton B-Line series strut fittings and accessories, 6" Height, 16.5" Length, 1.62" Width, 4.05lbs, Steel, Bracket, Uniform load capacity 1200 lb, Hot-dipped galvanized
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 6 in
- Product Length Depth:
- 16.5 in
- Product Weight:
- 4.05 lb
- Product Width:
- 1.62 in
- Special Features:
- 4 holes 9/16 in diameter,(2) 9/16 In diameter
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Bracket
- Product Finish:
- Hot-dipped galvanized
- Product Details:
- Bracket
- Product Material:
- Steel
B-LINE B290HDG – Frequently Asked Questions
1) How much load will the Eaton B-Line B290HDG strut bracket carry?
The B290HDG bracket is rated for a uniform load capacity of 1200 lb. That is a uniform load figure, so a concentrated point load at the end of the 16.5 inch leg is not the same thing. Size your hanger spacing off the uniform rating.
2) Can the B290HDG bracket be used outdoors or in a wet area?
Yes. It is hot-dipped galvanized steel, which is the finish normally specified for exterior, rooftop, parking structure and damp mechanical room work. Plain or electro-galvanized fittings are the ones to keep indoors and dry.
3) What are the actual dimensions of the Eaton B-Line B290HDG bracket?
It measures 6 in height, 16.5 in length/depth and 1.62 in width, and weighs 4.05 lb. The 1.62 in width is what matters on layout: it sits flush on standard 1-5/8 inch strut, so it will not overhang the channel.
4) Is the B290HDG a strut fitting or a standalone mounting bracket?
It is a strut fitting bracket from the Eaton B-Line strut fittings and accessories line, made to bolt onto channel rather than stand on its own. You supply the strut, channel nuts and bolts; the bracket is the connecting piece.
5) Do I need to order anything else with the B290HDG bracket to finish the install?
Plan on strut channel, channel nuts and 1/2 inch bolts with washers, plus whatever anchors your structure calls for. The bracket ships as the steel fitting only, drilled with four 9/16 inch holes and two more at 9/16 inch.
6) Is a hot-dipped galvanized strut bracket worth it over a plain finish for an indoor electrical room?
For a dry, conditioned indoor electrical room the hot-dip coating on the B290HDG is more corrosion protection than the job needs, though it does no harm and it standardizes your stock across indoor and outdoor runs. Where it earns its keep is exterior conduit racks, rooftop equipment supports, wash-down areas and unheated garages.
How fast can I get the B-LINE B290HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B290HDG come with a warranty?
Absolutely. The B-LINE B290HDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B290HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B290HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.