B-Line B103PAZN Eaton series strut fittings and accessories, 4.12" Height, 4.12" Length, 1.62" Width, 0.56lbs, Steel, Pre-assembled fitting, Three hole corner angle, 90 deg, pre-assembled, Thickness 1/4 in, Electro-plated

B103PAZN is a three hole corner angle for strut channel, bent 90 degrees, so it ties two runs of strut together at a right angle. It ships pre-assembled, meaning the hardware comes attached rather than bagged separately. Steel construction, 1/4 inch thick material.

The finish is electro-plated zinc on steel, which is a dry indoor finish. For exterior, damp or corrosive environments, specify a hot dip galvanized or stainless strut fitting instead. Electro-plated plating is thin and will not hold up to weather exposure the way a hot dip coating does.

It is a pre-assembled fitting, so the attachment hardware comes with it. You are not ordering channel nuts and bolts as a separate line to make it up on site. What you still supply is the strut channel itself.

Order it as B103PAZN, in the Eaton B-Line strut fittings and accessories line. One model only, no finish or size options to pick on this part number.

Use the three hole corner angle, like the B103PAZN, where two strut runs meet at 90 degrees and you need the joint to carry load across the corner, such as a trapeze drop off a wall-mounted run. A flat plate or splice plate is for joining two pieces of strut in the same plane, in line, not at an angle. The 90 degree bend here is the whole point of the fitting.

No listing or certification is carried on this fitting. It is a mechanical strut bracket, and the load values for a strut assembly come from the channel and the anchorage, not from a certification on the angle.