B-Line B103HDG Eaton series st...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$79.48
$40.50
Image coming soon

B-Line B103HDG Eaton series strut fittings and accessories, 4.12" Height, 4.12" Length, 1.62" Width, 0.56lbs, Steel, Pre-assembled fitting, Three hole corner angle, 90 deg, Thickness 1/4 in, Hot-dipped galvanized

(No reviews yet) Write a Review

Model: B103HDG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$79.48
$40.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut fittings and accessories, 4.12" Height, 4.12" Length, 1.62" Width, 0.56lbs, Steel, Pre-assembled fitting, Three hole corner angle, 90 deg, Thickness 1/4 in, Hot-dipped galvanized

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Material Gauge:
1/4"
Product Height:
4.12 in
Product Length Depth:
4.12 in
Product Weight:
.56 lb
Product Width:
1.62 in
Special Features:
Pre-assembled fitting
Department:
Electrical
Product Type:
Three hole corner angle, 90 deg
Product Finish:
Hot-dipped galvanized
Product Details:
Three hole corner angle, 90 deg
Product Material:
Steel

B-LINE B103HDG – Frequently Asked Questions

1) Is the B-Line B103HDG corner angle rated for outdoor or wet locations?
The B103HDG is hot-dipped galvanized steel, which is the finish B-Line uses for exterior, damp, and corrosive-environment strut runs. That makes it suitable for rooftop mechanical supports, parking structures, and exterior pipe racks where a plain or electro-galvanized fitting would rust at the cut edges. Hot-dip coats the part after fabrication, so the hole edges and formed corner are covered too.
2) What does a three hole 90 degree corner angle actually do in a strut assembly?
It ties two runs of strut together at a right angle. The B103HDG has three holes split across the two legs of the 90 degree bend, so you bolt one leg to the face of one channel and the other leg to the channel turning off it. Typical uses are squaring up trapeze hangers, bracing a vertical drop off a horizontal run, and stiffening a corner in a pipe or equipment frame.
3) Does the B103HDG come with the channel nuts and bolts to attach it?
No. B-Line supplies the B103HDG as a pre-assembled fitting, meaning the angle itself arrives formed and finished, but the hardware that fastens it to the strut is separate. Order channel nuts and hex bolts in a matching hot-dip galvanized finish so you are not mixing coatings on an exterior run.
4) Will the B103HDG fit standard 1-5/8 inch strut channel?
Yes. The fitting is 1.62 inches wide, which is the 1-5/8 inch nominal width of standard strut channel, so the leg seats flush on the channel face without overhang. Each leg is 4.12 inches long, giving you room for the bolt pattern along the run.
5) What is the correct Eaton part number to reorder this galvanized corner angle?
Order it as B103HDG. The base fitting is the B103 and the HDG suffix is the hot-dipped galvanized finish, so dropping the suffix gets you the same angle in a different coating.
6) Can I use the same corner angle on every bracket in a rooftop support run?
Yes, and standardizing on one fitting is the practical way to buy it. Every B103HDG is the same 4.12 inch by 4.12 inch 90 degree angle in 1/4 inch steel with the hot-dip finish, so a facility can stock one part number for all right-angle strut connections instead of matching several finishes and thicknesses across a roof.
How fast can I get the B-LINE B103HDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B103HDG come with a warranty?
Absolutely. The B-LINE B103HDG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B103HDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B103HDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!