You may also like
B-Line B134LZN Eaton series strut fittings and accessories, 4.20" Height, 3.5" Length, 1.62" Width, 1.00lbs, Steel, Four hole gussetted corner angle, 90 deg | Left hand, Thickness 1/4 in, Electro-plated
Model: BLN-B134LZN
Eaton B-Line series strut fittings and accessories, 4.20" Height, 3.5" Length, 1.62" Width, 1.00lbs, Steel, Four hole gussetted corner angle, 90 deg | Left hand, Thickness 1/4 in, Electro-plated
B-LINE
$122.69
$98.37
B-Line Eaton series strut fittings and accessories, 4.2" Height, 3.5" Length, 1.62" Width, 1lbs, Steel, Left hand four hole gussetted corner angle, 90
Model: BLN-B234LGRN
Eaton B-Line series strut fittings and accessories, 4.2" Height, 3.5" Length, 1.62" Width, 1lbs, Steel, Left hand four hole gussetted corner angle, 90 deg, DURA GREEN
B-LINE
$10,286.63
B-Line B234LSS4 Eaton series strut fittings and accessories, 4.2" Height, 3.5" Length, 1.62" Width, 1lbs, Steel, Left hand four hole gussetted corner angle, 90 deg, Stainless steel type 304
Model: BLN-B234LSS4
Eaton B-Line series strut fittings and accessories, 4.2" Height, 3.5" Length, 1.62" Width, 1lbs, Steel, Left hand four hole gussetted corner angle, 90 deg, Stainless steel type 304
B-LINE
$300.90
B-Line B234LHDG Eaton series strut fittings and accessories, 4.2" Height, 3.5" Length, 1.62" Width, 1lbs, Steel, Left hand four hole gussetted corner angle, 90 deg, Hot-dipped galvanized
Model: BLN-B234LHDG
Eaton B-Line series strut fittings and accessories, 4.2" Height, 3.5" Length, 1.62" Width, 1lbs, Steel, Left hand four hole gussetted corner angle, 90 deg, Hot-dipped galvanized
B-LINE
$147.94
$133.09
B-Line B234RSS4 Eaton series strut fittings and accessories, 4.2" Height, 3.5" Length, 1.62" Width, 1lbs, Steel, Right hand four hole gussetted corner angle, 90 deg, Stainless steel type 304
Model: BLN-B234RSS4
Eaton B-Line series strut fittings and accessories, 4.2" Height, 3.5" Length, 1.62" Width, 1lbs, Steel, Right hand four hole gussetted corner angle, 90 deg, Stainless steel type 304
B-LINE
$300.90
Eaton B-Line series strut fittings and accessories, 4.2" Height, 3.5" Length, 1.62" Width, 1lbs, Steel, Left hand four hole gussetted corner angle, 90 deg, Electro-plated
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 4.2 in
- Product Length Depth:
- 3.5 in
- Product Weight:
- 1 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Left hand four hole gussetted corner angle, 90 deg
- Product Finish:
- Electro-plated
- Product Details:
- Left hand four hole gussetted corner angle, 90 deg
- Product Material:
- Steel
B-LINE B234LZN – Frequently Asked Questions
1) Is the B-Line B234LZN corner angle left hand or right hand?
The B234LZN is the left hand version of the four hole gussetted 90 degree corner angle. Handing matters on a gusseted angle because the gusset sits on one side of the corner only, so the fitting braces in one direction. If the brace needs to fall on the opposite face of your strut run, you need the right hand mate instead. Check the orientation on the drawing before you order a batch.
2) Is the electro-plated finish on the B234LZN okay for outdoor or wet locations?
The B234LZN is steel with an electro-plated finish, which is a zinc plating intended for dry indoor use. For rooftops, parking structures, wash-down areas, or anything exposed to weather, go to a hot dip galvanized or stainless version of the same corner angle instead. Plated steel will show rust at cut edges and fastener points in those environments.
3) What are the dimensions of the B234LZN strut corner angle?
It measures 4.2 inches in height, 3.5 inches in length/depth, and 1.62 inches in width, and weighs 1 lb. The 1.62 inch width is the giveaway that it is sized to sit on standard 1-5/8 inch strut channel face, so it lands flat on the channel without overhang.
4) Does the B234LZN 90 degree angle come with bolts and channel nuts?
No. The B234LZN is the steel angle bracket only. The four holes take strut nuts and hex bolts sized to your channel, and those are ordered separately along with any washers your spec calls for. Budget four nut-and-bolt sets per fitting if you are using all four holes.
5) What is a gussetted corner angle used for on a strut run?
It ties two runs of strut channel together at 90 degrees, and the gusset is the triangular web welded across the corner that keeps the joint from opening up under load. A plain four hole angle relies entirely on the bolts to resist the moment at the corner; the gusseted version carries it in the steel. Use gusseted where the corner is taking cantilevered weight, such as a pipe trapeze arm or a wall-mounted support leg.
6) What is the Eaton B-Line part number for the left hand gusseted corner angle?
B234LZN is the manufacturer part number, sold under the Eaton B-Line strut fittings and accessories line. Order by that number to get the left hand, four hole, electro-plated steel version.
How fast can I get the B-LINE B234LZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B234LZN come with a warranty?
Absolutely. The B-LINE B234LZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B234LZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B234LZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.