B-Line B180SHLZN Eaton series ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$183.39
$179.39
Image coming soon

B-Line B180SHLZN Eaton series strut fittings and accessories, 4.43" Height, 16" Length, 1.62" Width, 2.04lbs, Steel, Left bracing slotted bracket, Thickness 1/4 in, Electro-plated

(No reviews yet) Write a Review

Model: B180SHLZN

In Stock (leaves warehouse same day if ordered before 3pm ET)

$183.39
$179.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut fittings and accessories, 4.43" Height, 16" Length, 1.62" Width, 2.04lbs, Steel, Left bracing slotted bracket, Thickness 1/4 in, Electro-plated

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Material Gauge:
1/4"
Product Height:
4.43 in
Product Length Depth:
16 in
Product Weight:
2.04 lb
Product Width:
1.62 in
Special Features:
6 holes ,(1)7/16 In dia,(4)1In lenX13/32
Department:
Electrical
Product Group:
Mounting Hardware
Product Subgroup:
Brackets
Product Type:
Left bracing slotted bracket
Product Finish:
Electro-plated
Product Details:
Left bracing slotted bracket
Product Material:
Steel

B-LINE B180SHLZN – Frequently Asked Questions

1) Is the B-Line B180SHLZN bracket handed, and do I need a right-hand version too?
The B180SHLZN is a left bracing slotted bracket, so it is handed. If your brace runs the opposite direction off the strut, you need the matching right-hand bracing bracket instead. On symmetrical installs where braces run both ways from a single point, plan on one of each rather than two of the same part.
2) What are the hole sizes and slot dimensions on the B180SHLZN bracing bracket?
Six holes total: one 7/16 inch diameter round hole and four slots of 1 inch length by 13/32 inch. The 7/16 inch hole and the 13/32 inch slot width both take standard 3/8 inch strut hardware, and the 1 inch slots give you adjustment along the brace before you tighten down.
3) Can I use this B-Line bracing bracket outdoors or in a wet area?
The B180SHLZN carries an electro-plated zinc finish on steel. That is an indoor, dry-location finish. For rooftop, exterior, corrosive, or washdown environments, specify a hot-dip galvanized or stainless equivalent instead.
4) How thick is the steel on the B-Line B180SHLZN, and is it heavy enough for structural bracing?
It is 1/4 inch steel, which is plate thickness rather than formed light-gauge sheet. That is the material used for diagonal bracing fittings where the load is carried in tension and compression through the bracket rather than just hanging off it. Full part weighs 2.04 lb.
5) What are the overall dimensions of the B180SHLZN slotted bracing bracket?
Height 4.43 inches, length 16 inches, width 1.62 inches. The 16 inch run is what sets how far out along the brace the bracket reaches, so check your brace geometry against that before ordering, and the 1.62 inch width keeps it inside the face of standard 1-5/8 inch strut.
6) Does the B180SHLZN bracket come with the nuts and bolts to attach it to strut?
No. The B180SHLZN is supplied as the bracket alone. Order strut nuts, bolts, and washers separately, sized to the 7/16 inch hole and 13/32 inch slots.
7) What is a slotted bracing bracket used for on a strut system?
It makes the diagonal connection between a strut trapeze or cantilever arm and the structure, triangulating the assembly so it resists sway and lateral load instead of relying on the hanger rod alone. The slots let you set the angle and length of that diagonal on site. On the B180SHLZN, four 1 inch slots give that adjustment and the 16 inch body sets the reach.
8) What is the exact part number to order the Eaton B-Line left bracing slotted bracket?
Order it as B-Line B180SHLZN, part of the Eaton B-Line strut fittings and accessories range. That number covers the left-hand bracing slotted bracket in 1/4 inch steel with the electro-plated finish.
How fast can I get the B-LINE B180SHLZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B180SHLZN come with a warranty?
Absolutely. The B-LINE B180SHLZN is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B180SHLZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B180SHLZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!