Eaton B-Line series strut fittings and accessories, 4.43" Height, 16" Length, 1.62" Width, 2.04lbs, Steel, Left bracing slotted bracket, Thickness 1/4 in, DURA GREEN
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Material Gauge:
- 1/4"
- Product Height:
- 4.43 in
- Product Length Depth:
- 16 in
- Product Weight:
- 2.04 lb
- Product Width:
- 1.62 in
- Special Features:
- 6 holes ,(1)7/16 In dia,(4)1In lenX13/32
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Left bracing slotted bracket
- Product Finish:
- DURA GREEN
- Product Details:
- Left bracing slotted bracket
- Product Material:
- Steel
- Product Length:
- 16 in
B-LINE B180SHLGRN – Frequently Asked Questions
1) Is the B-Line B180SHLGRN bracket left-hand or right-hand, and do I need a matching opposite?
The B180SHLGRN is the left bracing slotted bracket. Bracing brackets are handed, so if you are building symmetrical knee bracing on both sides of a strut run you will need the right-hand version as well. Ordering two lefts gives you two of the same hand, not a pair.
2) What size bolts does the B-Line B180SHLGRN slotted bracing bracket take?
There are 6 holes in the bracket: one 7/16 inch diameter round hole and four 1 inch long by 13/32 inch slots. The 13/32 inch slots take 3/8 inch strut hardware with room to adjust, and the 7/16 inch hole suits a 3/8 inch bolt as well.
3) Are the bolts and strut nuts included with the B180SHLGRN bracket?
No. The B180SHLGRN ships as the bracket alone, quarter-inch steel with six pre-punched holes. You supply the channel nuts, bolts and washers to suit your strut profile, sized to the 13/32 inch slots and 7/16 inch hole.
4) How long is the B-Line left bracing slotted bracket and how much does it weigh?
It runs 16 inches on the long leg, with a 4.43 inch height and 1.62 inch width, and weighs 2.04 lb. The 16 inch reach is what sets how far out from the strut the brace picks up the load, so check your span before you order.
5) How thick is the steel on this B-Line bracing bracket?
Quarter-inch steel. That 1/4 inch gauge is heavier than the 1/8 and 3/16 stock used on light-duty strut fittings, which is what lets it carry a diagonal brace load rather than just locate a member.
6) What is DURA GREEN finish on B-Line strut fittings, and is it OK outdoors?
DURA GREEN is Eaton B-Line's green coating on the steel fitting. It is a coated carbon steel part, not stainless, so for wet or corrosive exposure most specifiers step up to hot-dip galvanized or stainless strut hardware instead.
How fast can I get the B-LINE B180SHLGRN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B180SHLGRN come with a warranty?
Absolutely. The B-LINE B180SHLGRN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B180SHLGRN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B180SHLGRN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.