Eaton B-Line series strut fittings and accessories, .82" Height, 1.62" Length, 1.62" Width, .04lbs, Steel, End cap, 12 gauge, Fits channel type B52, Yellow zinc chromate
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- For Channel Type:
- Fits channel type B52
- Material Gauge:
- 12 Gauge
- Product Height:
- .82 in
- Product Length Depth:
- 1.62 in
- Product Weight:
- .04 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- End cap
- Product Finish:
- Yellow zinc chromate
- Product Details:
- End cap
- Product Material:
- Steel
B-LINE B220YZN – Frequently Asked Questions
1) What channel does the Eaton B-Line B220YZN end cap fit?
The B220YZN end cap is made for B-Line B52 channel. It closes off the open end of a cut strut run, so if your channel is a different profile (single-depth 1-5/8 strut such as B22, or a deeper back-to-back section), this cap will not seat correctly and you need the cap matched to that channel type.
2) What are the dimensions of the B220YZN strut end cap?
It measures .82 x 1.62 x 1.62 inches (height, length/depth, width) and weighs .04 lb. Those outside numbers are what matter if the strut run finishes tight against a wall or another member, since the cap adds under an inch of height at the cut end.
3) Is a yellow zinc chromate end cap OK for outdoor or damp strut runs?
Yellow zinc chromate is a coating for dry indoor service. It gives better corrosion resistance than plain steel in a conditioned mechanical or electrical room, but for exterior, wash-down, or corrosive environments you want a hot-dip galvanized or stainless cap and channel instead.
4) Do I need an end cap on every cut length of B52 strut?
Caps are used on exposed cut ends. On field-cut runs the sheared edge is sharp and the open channel collects dust and debris, so specifiers commonly require a cap at each free end for safety and appearance. Ends that terminate into a fitting, base, or closed connection do not need one. Count one B220YZN per exposed B52 end when you order.
5) What is the part number to order for a B52 channel end cap in yellow zinc?
Order Eaton B-Line B220YZN. The YZN suffix is the yellow zinc chromate finish, and the fitting is the steel end cap for B52 channel.
6) What gauge and material is this B-Line end cap, and will it hold up to being knocked in a mechanical room?
It is 12 gauge steel, the same weight of material as standard strut channel, so it holds its shape against incidental contact rather than crushing like a plastic snap cap. For electrical rooms and overhead trapeze runs where cut ends are exposed, that matters more than the cosmetic finish.
How fast can I get the B-LINE B220YZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B220YZN come with a warranty?
Absolutely. The B-LINE B220YZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B220YZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B220YZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.