Eaton B-Line series strut mounting bracket, Conduit and cable, 1" Height, 1" Length, 1" Width, 0.11lbs, Conduit size EMT: 1", Rigid: 0.75", Conduit strut clamps, 300 lbs load capacity, Pre-galvanized
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Load Capacity:
- 300 lbs
- Product Category:
- Conduit and cable
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .11 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Conduit strut clamps
- Product Size:
- Conduit size EMT: 1 inch, rigid: 0.75 inch
- Product Details:
- Conduit strut clamps
B-LINE B1516 – Frequently Asked Questions
1) What conduit size does the B-Line B1516 strut clamp fit?
The B-Line B1516 conduit strut clamp is sized for 1 inch EMT or 3/4 inch rigid conduit. Those two share the same outside diameter, which is why one clamp covers both. If you are running 3/4 inch EMT or 1 inch rigid, this is the wrong size clamp and you need the part sized for that pipe.
2) Is the B-Line B1516 strut clamp UL listed for electrical work?
Yes, the B1516 conduit clamp is UL/CUL listed, so it carries both the US and Canadian listings that an inspector or a spec-driven institutional job typically calls for on conduit support hardware.
3) How much weight can a B1516 conduit clamp hold on strut?
Rated at 300 lbs load capacity. That is per clamp, so on a long horizontal run the spacing of your strut channels, not the clamp, is usually what governs the support interval.
4) Can I use the B1516 conduit clamp outdoors or in a damp area?
The B1516 is a pre-galvanized clamp. Pre-galvanized steel is suited to interior and protected locations; for direct weather exposure, coastal air, or corrosive process areas, specify a hot-dip galvanized or stainless clamp instead.
5) What part number do I order for a 1 inch EMT strut clamp from Eaton B-Line?
The catalog number is B1516, from the Eaton B-Line series of conduit and cable support hardware. Order by that number when you are matching what is already installed on a job or standardizing a facility's conduit supports.
6) Does the B1516 conduit clamp come with the strut nut and bolt?
The B1516 is supplied as the clamp itself, a conduit strut clamp for mounting pipe to channel. Plan your order to include the channel nuts and hardware you need for the run, plus the strut itself.
How fast can I get the B-LINE B1516 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B1516 come with a warranty?
Absolutely. The B-LINE B1516 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B1516?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B1516 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.