Eaton B-Line series strut mounting bracket, Conduit and cable, 1" Height, 1" Length, 1" Width, 0.125lbs, Conduit size EMT: 1.25", Rigid: 1", Conduit strut clamps, 300 lbs load capacity, Pre-galvanized
Manufacturer Resources
Product Specs
- Certifications:
- UL/CUL listed
- Load Capacity:
- 300 lbs
- Product Category:
- Conduit and cable
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .125 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Conduit strut clamps
- Product Size:
- Conduit size EMT: 1.25 inch, rigid: 1 inch
- Product Details:
- Conduit strut clamps
B-LINE B1520 – Frequently Asked Questions
1) What conduit size does the Eaton B-Line B1520 strut clamp fit?
The B1520 conduit strut clamp is sized for 1-1/4 inch EMT or 1 inch rigid conduit. Those are two different trade sizes with nearly the same outside diameter, which is why one clamp covers both. If you're running 1 inch EMT or 1-1/4 inch rigid, this is not the clamp for that run.
2) Is the B-Line B1520 conduit clamp UL listed for an inspected commercial job?
Yes, the B1520 is UL/CUL listed, so it carries both the US and Canadian listings for an inspected electrical install.
3) How much weight will a B1520 conduit clamp hold on strut?
Rated at 300 lbs load capacity. That is the clamp rating; the strut, the anchors into the structure, and the spacing of your supports all have their own limits, so the weakest point in the assembly governs the run.
4) Is the B1520 clamp galvanized, and can I use it outdoors?
The B1520 is pre-galvanized steel. That finish is intended for dry indoor and protected service; for direct weather exposure, wash-down areas, or corrosive environments, specify a hot dip galvanized or stainless conduit clamp instead.
5) Do I need a strut nut and bolt to install the B1520 conduit clamp?
Yes. The B1520 is a strut clamp, meaning it mounts to channel and is fastened with a channel nut and bolt sized to your strut. Order those separately along with the strut itself, and confirm the nut matches your channel series.
6) How much space does the B1520 clamp take up on a strut run?
The clamp body measures 1 x 1 x 1 inch, so it occupies about an inch of channel per conduit. That matters when you're ganging several runs of conduit on one piece of strut and need to know how many will fit end to end.
How fast can I get the B-LINE B1520 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B1520 come with a warranty?
Absolutely. The B-LINE B1520 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B1520?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B1520 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.