B-Line Eaton series strut pipe clamps and accessories, .0074" height, 3.351" length, 1.25" width, Steel, Includes combination recess hex head machine

The B2011PASS6 clamp is finished in Stainless steel type 316, which is the grade specified for wet, coastal, and chemically aggressive locations. The clamp body itself is steel. If your run is indoors and dry, a plain electro-galvanized strut clamp does the same mechanical job for less material cost, but for washdown areas, rooftops, water treatment, or shoreline sites, the 316 designation is the reason to pick this one.

The fastener is included. Each B2011PASS6 ships with a combination recess hex head machine screw, so you are not buying strut nuts and screws as a separate line to close the clamp onto the channel. Plan on a strut channel already in place to receive it.

It measures 3.351 inches in length/depth by 1.25 inches in width, with a stated height of .0074 inch, and weighs .2 lb. The 1.25 inch width is the number that matters when you are spacing multiple clamps along a single length of strut, and the .2 lb per piece lets you total hanger load quickly when a run carries dozens of them.

Order it as Eaton B-Line B2011PASS6. The PASS6 suffix is what identifies the type 316 stainless version, so if a submittal calls for 316 on a strut-mounted pipe or conduit clamp, that full designation is what belongs on the purchase order rather than a shortened B2011 callout.

Yes. The B2011PASS6 is catalogued as a pipe or conduit clamp, so it supports either, provided the run diameter matches the clamp size. It mounts to strut channel rather than directly to a wall or deck, so the channel and its anchors are the load path you need to size, not the clamp alone.