B-Line Eaton series strut pipe clamps and accessories, .059" height, 2.396" length, 1.25" width, Steel, Includes combination recess hex head machine s

The B2008PASS4 ships with a combination recess hex head machine screw, so the fastener that closes the clamp onto the strut comes in the box. You still need the strut channel itself and, depending on the run, a strut nut or spring nut if your mounting method calls for one.

The clamp body is steel with a type 304 stainless steel finish. Type 304 is the standard corrosion resistant grade used for damp, washdown, and exterior electrical and mechanical support work, so it holds up better than plain electroplated zinc in those locations. For heavy chloride exposure, such as coastal or pool chemical areas, buyers typically step up to type 316.

Dimensions are .059 x 2.396 x 1.25 inches as published (height, length/depth, width), and it weighs .11 lb. That light weight and thin strap section matter when you are hanging a long row of clamps on a single strut run, since the dead load added by the hardware itself is negligible compared with the pipe or conduit it carries.

It is an Eaton B-Line series strut pipe clamp, used to fasten pipe or conduit to strut channel with the supplied machine screw. The trade uses the same clamp family for both plumbing pipe and electrical raceway; this one is catalogued for electrical work. Match the clamp size to the actual outside diameter of the pipe or conduit you are supporting, since a strut clamp only grips the one size it is formed for.

Order it as B2008PASS4, the Eaton B-Line manufacturer part number. The PASS4 suffix on this family indicates the type 304 stainless configuration, which is what distinguishes it from the plain and zinc-finished clamps in the same series.