Eaton B-Line series strut pipe clamps and accessories, .06" height, 2.117" length, 1.25" width, 400 lbs, Steel, Safety factor of 5, Include combination recess, O.D pipe conduit clamp, Yellow zinc chromate, 1/4 -20
Manufacturer Resources
Product Specs
- Bolt Pin Size:
- 1/4"-20
- Certifications:
- Not Applicable
- Load Capacity:
- 400 lbs
- Product Height:
- .06 in
- Product Length Depth:
- 2.117 in
- Product Weight:
- .1 lb
- Product Width:
- 1.25 in
- Special Features:
- Safety factor of 5 Include combination recess
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- O.D pipe conduit clamp
- Product Details:
- O.D pipe conduit clamp
- Product Material:
- Steel
B-LINE B2026YZN – Frequently Asked Questions
1) What size bolt does the B2026YZN strut clamp take?
It uses 1/4-20 hardware. Order 1/4-20 strut nuts and bolts to mount it, and keep the thread pitch consistent across the run so your spare hardware works on every clamp.
2) Is the B2026YZN clamp sized by pipe O.D. or by nominal trade size?
It is an O.D. pipe conduit clamp, so it is matched to the actual outside diameter of the pipe or conduit, not a nominal trade size. Measure the outside diameter of what you are hanging (or look up the O.D. for your conduit type, since EMT, rigid, and copper of the same nominal size differ) and match the clamp to that figure.
3) Will the B-Line B2026YZN clamp hold in an outdoor or damp location?
The clamp is steel with a yellow zinc chromate finish, which gives light corrosion protection suited to dry indoor and sheltered work. For wet exterior, washdown, or coastal runs, specify an electro-galvanized, hot-dip galvanized, or stainless strut clamp instead.
4) Does the B2026YZN pipe clamp come with the strut nut and bolt?
Plan on ordering mounting hardware separately. The B2026YZN is the clamp itself, sized for 1/4-20 hardware, so you will also need 1/4-20 strut nuts and bolts plus the strut channel for the run.
5) What is a combination recess on a strut pipe clamp and why does it matter?
The B2026YZN includes a combination recess, meaning the clamp seats into the channel of the strut so it locates itself and resists sliding along the run once tightened. It saves lining the clamp up by eye and keeps spacing consistent on a multi-clamp rack.
6) What are the dimensions and weight of the B2026YZN clamp?
It measures 2.117 x 1.25 x .06 inches (length, width, height) and weighs .1 lb each. The thin .06 inch stock and light weight mean a full carton of these adds very little to a strut assembly load.
How fast can I get the B-LINE B2026YZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2026YZN come with a warranty?
Absolutely. The B-LINE B2026YZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2026YZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2026YZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.