Eaton B-Line series strut pipe clamps and accessories, .0625" height, 0.5" length, 1.25" width, 400 lbs, Steel, Safety factor of 5, Include combination recess, O.D pipe conduit clamp, Electro-plated zinc, 1/4 -20
Manufacturer Resources
Product Specs
- Bolt Pin Size:
- 1/4"-20
- Certifications:
- Not Applicable
- Load Capacity:
- 400 lbs
- Product Height:
- .0625 in
- Product Length Depth:
- .5 in
- Product Weight:
- .09 lb
- Product Width:
- 1.25 in
- Special Features:
- Safety factor of 5 Include combination recess
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- O.D pipe conduit clamp
- Product Details:
- O.D pipe conduit clamp
- Product Material:
- Steel
- Product Length:
- 0.5 in
B-LINE B2025PAZN – Frequently Asked Questions
1) How much weight can the B-Line B2025PAZN pipe clamp hold?
Rated at 400 lbs load capacity with a safety factor of 5 built into that rating. That covers typical conduit and small pipe runs supported off strut; for heavier lines, step up to a clamp with a higher published rating.
2) Is this B-Line clamp sized by pipe O.D. or by nominal trade size?
It is an O.D. pipe conduit clamp, so it is selected against the actual outside diameter of the conduit or tube, not the nominal trade size. Measure the O.D. of what you are supporting before you pick the part.
3) Does the B-Line B2025PAZN pipe clamp come with the bolt and channel nut?
Plan on ordering the 1/4-20 bolt and matching strut channel nut separately. The B2025PAZN is the clamp body itself, specified with a 1/4-20 bolt pin size so the fasteners you pair with it need to match that thread.
4) Will a zinc plated steel conduit clamp hold up outdoors or in a wet area?
The B2025PAZN is steel with an electro-plated zinc finish. That is a standard indoor and dry-location finish for strut hardware. For exterior, washdown, or corrosive environments, specify a hot dip galvanized or stainless clamp instead.
5) What is the combination recess on the B-Line B2025PAZN for?
The combination recess lets the clamp seat correctly against the strut channel and accept common driver types on the fastener. It is part of why one clamp body covers the standard strut mounting arrangement rather than needing a channel-specific part.
6) What are the dimensions and weight of the B-Line B2025PAZN strut clamp?
It measures .0625 x .5 x 1.25 inches (height, length/depth, width as listed) and weighs .09 lb. Useful when you are counting up hanger weight on a long overhead run or figuring spacing on a crowded strut.
How fast can I get the B-LINE B2025PAZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2025PAZN come with a warranty?
Absolutely. The B-LINE B2025PAZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2025PAZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2025PAZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.