You may also like
B-Line Eaton series strut pipe clamps and accessories, .0966" height, 6.141" length, 1.25" width, Steel, Pre-assembled combination recess hex head scr
Model: BLN-B2016PAHDG
Eaton B-Line series strut pipe clamps and accessories, .0966" height, 6.141" length, 1.25" width, Steel, Pre-assembled combination recess hex head screw, Pipe or conduit clamps, Hot-dipped galvanized
B-LINE
$3,965.96
B-Line Eaton series strut pipe clamps and accessories, .0966" height, 4.394" length, 1.25" width, Steel, Pre-assembled combination recess hex head scr
Model: BLN-B2013PAHDG
Eaton B-Line series strut pipe clamps and accessories, .0966" height, 4.394" length, 1.25" width, Steel, Pre-assembled combination recess hex head screw, Pipe or conduit clamps, Hot-dipped galvanized
B-LINE
$2,651.43
B-Line Eaton series strut pipe clamps and accessories, .0966" height, 5.843" length, 1.25" width, Steel, Pre-assembled combination recess hex head scr
Model: BLN-B2015PAHDG
Eaton B-Line series strut pipe clamps and accessories, .0966" height, 5.843" length, 1.25" width, Steel, Pre-assembled combination recess hex head screw, Pipe or conduit clamps, Hot-dipped galvanized
B-LINE
$3,274.79
Eaton B-Line series strut pipe clamps and accessories, .0966" height, 5.039" length, 1.25" width, Steel, Pre-assembled combination recess hex head screw, Pipe or conduit clamps, HDG
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- .0966 in
- Product Length Depth:
- 5.039 in
- Product Weight:
- .38 lb
- Product Width:
- 1.25 in
- Special Features:
- Pre-assembled combination recess hex head screw
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Pipe or conduit clamps
- Product Details:
- Pipe or conduit clamps
- Product Material:
- Steel
B-LINE B2014PAHDG – Frequently Asked Questions
1) What is the Eaton B-Line B2014PAHDG used for?
It's a steel strut pipe clamp for securing pipe or conduit to strut channel. The clamp comes pre-assembled with a combination recess hex head screw, so the fastener is already captured in the clamp and the installer just drops it into the strut and tightens. Finish is hot dip galvanized.
2) Can the B2014PAHDG strut clamp be used outdoors or in a wet area?
The B2014PAHDG is hot dip galvanized steel, which is the finish normally specified for outdoor, damp, and unheated locations where plain electro-galvanized parts would rust. For chemical exposure or coastal splash, stainless strut hardware is the usual step up.
3) Do I need to buy a separate strut nut and screw for this B-Line clamp?
No separate hardware to order. The screw ships pre-assembled to the clamp as a combination recess hex head screw, so it can be driven with either a hex driver or a recess bit. You still supply the strut channel itself.
4) What size is the B2014PAHDG clamp, and will it fit in a standard strut channel?
The clamp measures .0966 x 5.039 x 1.25 inches. The 1.25 inch dimension is what matters for seating in the channel, since standard strut is 1-5/8 inches wide inside the lips. Each piece weighs .38 lb, which is worth knowing if you're figuring hanger loads across a long run.
5) What part number should I order for this hot dip galvanized B-Line strut clamp?
Order Eaton B-Line B2014PAHDG. The PA suffix indicates the pre-assembled screw and HDG the hot dip galvanized finish.
6) Is a strut pipe clamp the right choice, or should I use a conduit hanger?
A strut clamp like the B2014PAHDG is the right part when you already have strut channel run overhead or along a wall and want to attach pipe or conduit to it. If there's no strut, a beam clamp or a threaded rod hanger is the better route. The advantage here is the pre-assembled screw, which speeds up repetitive runs where you're setting dozens of supports.
How fast can I get the B-LINE B2014PAHDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2014PAHDG come with a warranty?
Absolutely. The B-LINE B2014PAHDG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2014PAHDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2014PAHDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.