B-Line Eaton series strut pipe...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3,965.96
B-Line Eaton series strut pipe clamps and accessories, .0966" height, 6.141" length, 1.25" width, Steel, Pre-assembled combination recess hex head scr

B-Line Eaton series strut pipe clamps and accessories, .0966" height, 6.141" length, 1.25" width, Steel, Pre-assembled combination recess hex head scr

(No reviews yet) Write a Review

Model: B2016PAHDG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3,965.96
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series strut pipe clamps and accessories, .0966" height, 6.141" length, 1.25" width, Steel, Pre-assembled combination recess hex head screw, Pipe or conduit clamps, Hot-dipped galvanized

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Product Height:
.0966 in
Product Length Depth:
6.141 in
Product Weight:
.61 lb
Product Width:
1.25 in
Special Features:
Pre-assembled combination recess hex head screw
Department:
Electrical
Product Group:
Conduit & Fittings
Product Subgroup:
Conduit Accessories
Product Type:
Pipe or conduit clamps
Product Details:
Pipe or conduit clamps
Product Material:
Steel
Product Length:
6.141 in

B-LINE B2016PAHDG – Frequently Asked Questions

1) Is the Eaton B-Line B2016PAHDG pipe clamp suitable for outdoor or wet-location strut runs?
Yes. The B2016PAHDG is steel with a hot-dipped galvanized finish, which is the finish specified for exterior, rooftop, parking structure and damp interior runs where a plain or electro-zinc clamp would rust out. Same clamp body, heavier corrosion protection.
2) Does the B-Line B2016PAHDG strut clamp come with the mounting hardware, or do I have to order nuts and bolts separately?
Hardware ships with it. The clamp comes with a pre-assembled combination recess hex head screw, so the fastener is already in the assembly when it lands on site. What it does not include is the strut channel itself or the channel nut, if your installation calls for one, so plan those into the material list.
3) What are the dimensions and weight of the B-Line B2016PAHDG conduit clamp?
It measures .0966 x 6.141 x 1.25 inches as height, length and width, and weighs .61 lb each. That 6.141 inch length is the number to check against your strut spacing and the clearance behind the pipe run before you commit to a hanger layout, and the .61 lb per piece adds up fast when you are pricing freight on a few hundred.
4) What is a strut pipe clamp like the B-Line B2016PAHDG actually used for?
It secures pipe or conduit to strut channel, so the run is held off the structure on a support system rather than strapped directly to deck or wall. Electricians use them for conduit racks and multi-run trapeze supports; mechanical trades use the same style for pipe. If you are fastening a single conduit straight to masonry or stud, a one-hole or two-hole strap is the simpler part.
5) I need to match clamps already installed on my strut, how do I make sure I order the same part?
Order by the manufacturer part number B2016PAHDG. The PA suffix indicates the pre-assembled screw version and HDG is the hot-dipped galvanized finish, so a clamp ordered under that full number matches what is already on the racks in both hardware and finish. Ordering the plain or zinc-plated equivalent will give you a visible finish mismatch and less corrosion protection on the same run.
6) Is the B2016PAHDG a listed or certified product I can cite on a submittal?
Certifications on the B2016PAHDG are recorded as Not Applicable, so treat it as a standard galvanized steel strut clamp rather than a listed assembly component. If your spec section calls for a listed support, that requirement has to be met by the overall support system you detail, not by this clamp on its own.
How fast can I get the B-LINE B2016PAHDG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2016PAHDG come with a warranty?
Absolutely. The B-LINE B2016PAHDG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2016PAHDG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2016PAHDG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!