B-Line Eaton series strut pipe clamps and accessories, .104" height, 5.039" length, 1.25" width, 800 lbs, Steel, Includes combination recess hex head

The B2014SS4 clamp is rated at 800 lbs load capacity. That covers most single-run pipe and conduit supports off strut, but the rating is for the clamp itself, so your strut, anchors and building structure still have to carry the same load.

It's Type 304 stainless steel. That's the grade to use for damp, washdown, coastal or corrosive areas where a plain or electro-plated clamp would rust out. Material is listed as steel, Type 304 stainless.

The B2014SS4 ships with a combination recess hex head machine screw, so the fastener that clamps it to the strut is in the box. You still supply the strut channel itself and whatever anchors the strut to the structure.

It measures .104 x 5.039 x 1.25 inches (height, length, width as listed) and weighs .38 lb. The 1.25 inch width is what matters most on a crowded strut run, since it sets how tightly you can space adjacent clamps on the same channel.

A strut clamp like the B2014SS4 is the right choice when you already have channel in the air and want every run supported off the same trapeze or wall-mounted strut. It bolts to the channel and captures the pipe or conduit. A standalone conduit hanger or one-hole strap makes more sense for a single run fastened straight to a wall or deck with no strut in place.

Order Eaton B-Line part number B2014SS4. The SS4 suffix is the Type 304 stainless version, which is what distinguishes it from the plain and plated variants of the same clamp body.

Mixing Type 304 stainless clamps with galvanized channel is common practice, but in wet or salt-air locations dissimilar metals in contact can drive galvanic corrosion of the zinc coating. Where the environment is aggressive enough to call for a 304 clamp, spec stainless strut and stainless anchors to match.

No listing or certification applies to this clamp; certifications are shown as Not Applicable. Buyers standardizing a facility should treat it as a mechanical support component and rely on the 800 lb load rating and the 304 stainless material when writing the spec.