B-Line Eaton series strut pipe clamps and accessories, .104" height, 5.843" length, 1.25" width, 800 lbs, Steel, Includes combination recess hex head

The B2015PASS6 clamp is rated at 800 lbs load capacity. That is the clamp's rating alone; the strut, anchors and structure it hangs from still have to carry the same load, so size those to match.

It is a steel clamp, described as stainless steel type 316. Type 316 is the grade contractors specify for wet, coastal or chemically aggressive environments, so it suits exterior runs, wash-down areas and water treatment work rather than only dry interior conduit.

The fastener is included. Each B2015PASS6 ships with a combination recess hex head machine screw, so you only need the strut and its channel nut or the strut's own nut arrangement to complete the attachment.

It measures .104 x 5.843 x 1.25 inches (height, length/depth, width) and weighs .44 lb each. The 1.25 inch width is what matters most on a crowded strut run, since it sets how tightly you can space adjacent clamps along the channel.

No certification applies to this clamp; the Certifications field reads Not Applicable. If your specification calls for a listed support component, ask your engineer whether a stainless 316 strut clamp without a listing satisfies the submittal before you order in quantity.

Order Eaton B-Line part number B2015PASS6. That single model number covers the clamp with its combination recess hex head machine screw included, so there is no separate hardware suffix to specify.

Type 316 stainless is the grade to standardize on where supports see salt air, humidity, or regular wash-down, and this B-Line clamp is described as stainless steel type 316. For dry interior electrical rooms a plated carbon steel strut clamp is the usual lower-cost choice, so many facilities split the standard by location rather than buying 316 everywhere.