B-Line B2017SS6 Eaton series strut pipe clamps and accessories, .104" height, 6.703" length, 1.25" width, Steel, Includes combination recess hex head machine screw, Pipe or conduit clamps, Stainless steel type 316

The material field on the B2017SS6 reads Steel, and the product description calls out stainless steel type 316. Type 316 is the marine and chemical grade stainless, the one specified where chlorides or washdown would pit standard 304, so it is the version to use on coastal, wastewater, food plant, and rooftop runs rather than a plated carbon clamp.

The screw is in the box. The B2017SS6 ships with a combination recess hex head machine screw, so the clamp can be set into the strut channel and tightened without sourcing separate fasteners. The combination head lets you drive it with a hex driver or a screwdriver bit, which matters on overhead runs where you only want one tool in hand.

Dimensions on the B2017SS6 are 6.703 in length/depth, 1.25 in width, and .104 in height, with a weight of .66 lb. The 1.25 in width is the dimension that seats in the channel opening of standard 1-5/8 in strut. Measure your channel slot before ordering if you are running a metric or proprietary section.

It is a strut-mounted pipe or conduit clamp: it bolts into channel and holds a run of pipe or conduit against it. Electrical contractors use clamps like this for supporting conduit racks off trapeze or wall-mounted strut. Because this one is the type 316 stainless version, it is the choice for corrosive or wet environments rather than dry interior work where a plated clamp would do.

Pair it with stainless channel and stainless fasteners where you can. The B2017SS6 is type 316 stainless and it ships with its own machine screw, but bolting stainless to galvanized or plain steel strut in a wet or salt-air location sets up galvanic action at the joint, which is the usual reason a 316 clamp still shows rust staining at the support. In dry interior locations the mix is not a concern.

Order it as B2017SS6, Eaton B-Line series. The SS6 suffix is how B-Line designates the type 316 stainless version of the clamp, which is what separates it from the plain and electro-galvanized clamps in the same B2017 family. Give distributors the full B2017SS6 designation so you do not get shipped the carbon steel equivalent.