B-Line B2019SS6 Eaton series strut pipe clamps and accessories, .104" height, 7.969" length, 1.25" width, 1000 lbs, Steel, Includes combination recess hex head machine screw, Pipe or conduit clamps, Stainless steel type 316

Yes. The B2019SS6 strut pipe clamp is Type 316 stainless steel, which is the grade specified for marine, coastal, wastewater and chemical exposure where standard electro-galvanized or Type 304 hardware pits. If the run is outdoors, in a washdown area, or near salt air, this is the material to put on it.

No. The B2019SS6 ships with a combination recess hex head machine screw included. You still need the channel nut and the strut itself, which are ordered separately.

Yes. It is a strut pipe or conduit clamp, used the same way on either: the clamp wraps the pipe and bolts down to the strut channel. Plumbing and mechanical trades use the same Eaton B-Line strut clamps for process and water lines that electricians use for conduit runs.

Pairing 316 stainless hardware with plain electro-galvanized strut is a common mismatch on exterior jobs. The clamp will outlast the channel, and the dissimilar metals in a wet environment accelerate the galvanized coating's breakdown at the contact point. If you are specifying the B2019SS6 for its 316 material, run it on stainless or at minimum hot-dip galvanized strut and stainless channel nuts.

Order it as B-Line B2019SS6. The SS6 suffix is the Type 316 stainless version of the B2019 clamp, so if a submittal calls out plain B2019 it is not the same material.

The clamp measures .104 x 7.969 x 1.25 inches (height, length, width as published) and weighs .77 lb. The 1.25 inch width is the figure that matters when you are spacing multiple clamps along one length of strut.