B-Line Eaton series Type 1 jun...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$416.80
B-Line Eaton series Type 1 junction boxes, 18" height, 4" length, 12" width, 1, Screw cover, SCGV enclosure, Surface mounted, Medium single door, 9 k

B-Line Eaton series Type 1 junction boxes, 18" height, 4" length, 12" width, 1, Screw cover, SCGV enclosure, Surface mounted, Medium single door, 9 k

(No reviews yet) Write a Review

Model: 18124 SCGV
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$416.80
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series Type 1 junction boxes, 18" height, 4" length, 12" width, NEMA 1, Screw cover, SCGV enclosure, Surface mounted, Medium single door, 9 knockouts each side,5 top and bottom, Thru holes, Galvanized steel

Manufacturer Resources

Product Specs

Bottom Knockouts:
9
Certifications:
UL 50
Country Of Origin:
United States
Cover Type:
Screw
Finish Color:
Unfinished
Mounting Hole Details:
Thru holes
Mounting Method:
Surface
Nema Rating:
1
Product Height:
18 in
Product Length Depth:
4 in
Product Weight:
11.4 lb
Product Width:
12 in
Side Knockouts:
9
Special Features:
Keyhole slots on cover, plated screws
Top Knockouts:
9
Wall Thickness:
16 gauge
Department:
Electrical
Product Model:
SCGV enclosure
Product Color:
Grey
Product Style:
Medium single door
Product Material:
Galvanized steel

B-LINE 18124 SCGV – Frequently Asked Questions

1) Can a NEMA 1 screw cover junction box like the B-Line 18124 SCGV be used outdoors or in a washdown area?
No. The 18124 SCGV carries a NEMA Type 1 rating, which is indoor use only, for protection against incidental contact and falling dirt. It offers no protection against rain, hose-down, dust, or oil, so keep it out of wet locations, exterior walls, and food processing washdown zones. For those areas you need a gasketed NEMA 3R, 4, or 4X enclosure instead.
2) What are the actual box dimensions on the B-Line 18124 SCGV junction box?
It measures 18 inches high, 12 inches wide, and 4 inches deep. That 4 inch depth is what usually decides the job, since it sets how much room you have behind the screw cover for conduit bodies, splice bundles, and bend radius on larger conductors.
3) How many knockouts does the 18124 SCGV have and where are they?
Knockouts are provided on all four sides of the box: 9 on each side, 9 on top, and 9 on the bottom. That gives you a lot of freedom to run conduit in from whichever direction the raceway comes at the wall without having to punch fresh holes on site.
4) How does the 18124 SCGV mount to the wall?
It is a surface mount enclosure with thru holes in the back pan, so you fasten it directly to the wall or structure with your own anchors or bolts through those holes. Mounting hardware is not part of the enclosure, so pick fasteners to suit the substrate and the 11.4 lb box plus whatever wiring it will hold. It is not a flush or recessed box.
5) Is this a hinged door box or a screw-on cover?
The cover is a screw cover, not a hinged door, secured with plated screws. Keyhole slots on the cover let you hang it on the screws and then tighten, which is the difference between a one-man and a two-man cover install on an 11.4 lb box at ceiling height. If you need frequent access for troubleshooting, a hinged-cover enclosure is the easier choice.
6) Is the galvanized finish on this B-Line box paintable, or does it come painted?
The box is galvanized steel and listed as unfinished, grey in appearance, so there is no paint or powder coat on it from the factory. Galvanized is normally left bare in mechanical rooms, back-of-house, and plenum spaces. If the spec calls for a color-matched enclosure in a finished area, order a painted enclosure rather than trying to top-coat galvanizing.
7) What gauge steel is the B-Line 18124 SCGV junction box, and is it heavy enough for a commercial install?
Body wall thickness is 16 gauge galvanized steel. That is the usual commercial weight for a screw cover pull and junction box this size, stiff enough to carry conduit entries and terminal blocks without the sides oil-canning when you tighten locknuts.
8) Which exact part number do I order for the 18 x 12 x 4 B-Line screw cover box, and where is it made?
Order Eaton B-Line part number 18124 SCGV. The SCGV designation is the screw cover galvanized enclosure line, and this one is made in the US.
How fast can I get the B-LINE 18124 SCGV delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 18124 SCGV come with a warranty?
Absolutely. The B-LINE 18124 SCGV is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 18124 SCGV?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 18124 SCGV from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!