B-Line Eaton series Type 1 jun...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,793.84
B-Line Eaton series Type 1 junction boxes, 24" height, 10" length, 18" width, 1, Screw cover, SCGV NK enclosure, Surface mounted, Medium single door,

B-Line Eaton series Type 1 junction boxes, 24" height, 10" length, 18" width, 1, Screw cover, SCGV NK enclosure, Surface mounted, Medium single door,

(No reviews yet) Write a Review

Model: 241810 SCGV NK
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,793.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series Type 1 junction boxes, 24" height, 10" length, 18" width, NEMA 1, Screw cover, SCGV NK enclosure, Surface mounted, Medium single door, No knockout, Thru holes, Galvanized steel

Manufacturer Resources

Product Specs

Certifications:
UL 50
Country Of Origin:
United States
Cover Type:
Screw
Finish Color:
Unfinished
Mounting Hole Details:
Thru holes
Mounting Method:
Surface
Nema Rating:
1
Product Height:
24 in
Product Length Depth:
10 in
Product Weight:
31 lb
Product Width:
18 in
Special Features:
Keyhole slots on cover, plated screws
Wall Thickness:
16 gauge
Department:
Electrical
Product Model:
SCGV NK enclosure
Product Color:
Grey
Product Style:
Medium single door
Product Material:
Galvanized steel

B-LINE 241810 SCGV NK – Frequently Asked Questions

1) Can a NEMA 1 screw cover junction box like the B-Line 241810 SCGV NK be used outdoors or in a wash-down area?
No. The 241810 SCGV NK carries a NEMA Type 1 rating, which is indoor, dry-location use only. It gives protection against incidental contact with the enclosed equipment and falling dirt, with no gasket and no water resistance. For outdoor, damp, or hose-down locations you need a Type 3R, 4, or 4X enclosure instead.
2) Does this B-Line junction box come with knockouts, or do I have to punch my own conduit openings?
It is the NK (no knockout) version, so all six sides come blank. You drill or punch your own openings wherever your conduit runs land. That is an advantage on a custom pull box and a drawback if you wanted pre-located hub openings, in which case order a knockout version of the same box instead.
3) Is this Eaton B-Line box UL listed for an inspected commercial job?
Yes, it is built to UL 50, the standard covering enclosures for electrical equipment, and carries the Type 1 rating. It is made in the US. For a plan submittal, cite the model as 241810 SCGV NK.
4) What are the actual box dimensions on the B-Line 241810 SCGV NK junction box?
It measures 24 inches high, 18 inches wide, and 10 inches deep, so it gives you a fairly deep gutter for pulling and splicing large conductors rather than a shallow wall box. Shipping weight is 31 lb, which is a two-hand lift onto the wall.
5) How does the screw cover on this enclosure work, and can one person get it back on?
The cover fastens with plated screws and has keyhole slots, so you can start the screws, hang the cover on them, and then tighten it down without holding the full weight of the cover in place. It is a screw cover, not a hinged door, so plan on removing the cover completely for service access.
6) How is the B-Line 241810 SCGV NK box mounted to the wall, and is hardware included?
It is a surface mount enclosure with thru holes in the back panel. You supply the anchors or bolts appropriate to your wall substrate, run them through those holes, and the box sits flat against the surface. Fasteners are not part of the enclosure.
7) What gauge steel is this junction box, and will it need painting?
The body is 16 gauge galvanized steel, left unfinished in a grey galvanized appearance. There is no paint or powder coat on it, so if the box is in a visible area and the spec calls for a color match you will need to prime and paint it in the field.
8) Do I get a mounting panel or terminal blocks inside this junction box?
No. The SCGV NK is a screw cover junction and pull box, meaning an empty galvanized shell with a removable cover. Any back panel, DIN rail, terminal strips, or grounding hardware you need for the splice is ordered separately.
How fast can I get the B-LINE 241810 SCGV NK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 241810 SCGV NK come with a warranty?
Absolutely. The B-LINE 241810 SCGV NK is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 241810 SCGV NK?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 241810 SCGV NK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!