B-Line Eaton series Type 1 junction boxes, 36" height, 6" length, 24" width, 1, Screw cover, SCGV NK enclosure, Surface mounted, Medium single door,

No. The 36246 SCGV NK carries a NEMA Type 1 rating, which is indoor use only, for protection against incidental contact and falling dirt. It offers no protection against water, dust-tight service, or corrosive atmospheres. For an outdoor or wet location you need a NEMA 3R or 4/4X enclosure instead.

It measures 36 inches high, 24 inches wide, and 6 inches deep. That 6 inch depth is what governs wire bending space and whether you can land large conductors or a terminal strip inside, so check it against your conduit size and conductor count before committing.

No knockouts. The NK in the model designation means no knockout, so every conduit entry gets field punched or hole sawed where you want it. That is the point of the NK version, it suits jobs where the conduit layout is set on site rather than by the factory pattern. If you want factory knockouts, order a knockout version of the screw cover box instead.

It is a surface mount enclosure with thru holes in the back for fasteners, so it bolts flat to a wall, strut, or backboard. The anchors or bolts are selected to suit your substrate and are not part of the box. At 53.8 pounds bare, plan the fastening and the help accordingly, and remember any devices or wire you add to that.

The enclosure is built to UL 50, the standard covering enclosures for electrical equipment, and it is a NEMA Type 1 indoor enclosure. It is made in the US, which matters on public work with domestic sourcing language in the spec.

Screw cover, not hinged. The cover lifts off entirely and is secured with plated screws, and it has keyhole slots so you can back the screws out and lift the cover clear without fully removing them. Good for pull and splice boxes you open rarely. If you need frequent access to devices inside, a hinged door enclosure is the easier choice.

14 gauge galvanized steel, left unfinished, so the surface is the grey of the galvanizing rather than a paint coat. If the enclosure is in a finished space where appearance matters, or you want a specific color, you would want a painted enclosure instead, since field painting galvanized steel needs the right primer.

The catalog number is 36246 SCGV NK from Eaton B-Line. The digits read out the size, 36 high by 24 wide by 6 deep, SC for screw cover, GV for galvanized, NK for no knockout. Quoting the full string including NK matters, because dropping it can get you the knockout version.