B-Line Eaton series Type 3/3R junction boxes, 30" height, 10" length, 24" width, 3 and 12, Screw cover, WPSC enclosure, Surface mounted, Medium singl

Yes. The 302410 WPSC is a Type 3/3R rated enclosure, so it is built for outdoor use against rain, sleet and windblown dust, and it also carries a Type 12 rating for indoor dust and dripping liquids. The door seals with an oil-resistant gasket and gasketed screws, and the body is carbon steel painted ANSI 61 grey.

30 inches high, 24 inches wide and 10 inches deep. The 30 x 24 opening is the usable back panel area you have for mounting gear, and the 10 inch depth is what decides whether a breaker, contactor or terminal stack clears the door.

It is a surface mount enclosure with external mounting feet welded on, so it hangs off the wall or strut without breaking the seal of the box. Nothing is drilled through the back, which is what keeps the Type 3R rating intact once it is up.

It is a screw cover, flanged style, in a medium single door configuration. That means the whole cover comes off when you back out the gasketed screws rather than swinging on hinges, so plan for clearance and a place to set the cover during service. If your crew needs a door they can open one-handed on a ladder, look for a hinged-cover version instead.

14 gauge carbon steel, painted. That is the standard commercial weight for wall-mount enclosures this size and it is why the box runs 59.6 lb empty, which matters when you are picking anchors and deciding whether it is a two-man lift.

WPSC boxes ship without knockouts. You punch conduit entries where you need them and use a raintight hub or sealing fitting to keep the Type 3R rating. Drill entries on the sides or bottom rather than the top face, since a top penetration is the fastest way to lose the outdoor rating.

Order B-Line part number 302410 WPSC. The number reads as the dimensions: 30 high, 24 wide, 10 deep, with WPSC for the weatherproof screw cover body.