Eaton B-Line series vertical meter pack, 200 A, 400 A, None, Ring type, 3R, Overhead/underground, ANSI 61 gray paint, #4 - 600 MCM, #6 - 250 MCM, Galvanized steel, Surface mount, 4, 2, 3
Manufacturer Resources
Product Specs
- Amperage Rating:
- 200A
- Certifications:
- UL
- Cover Door Type:
- Ring
- Degree Of Protection:
- 3R
- Feed Type:
- Overhead/underground
- Line Lug Size:
- #4 - 600 MCM
- Load Lug Size:
- #6-250 MCM
- Mounting Method:
- Surface mount
- Number Of Jaws:
- 4
- Number Of Positions:
- 2
- Number Of Wires:
- 3
- Product Height:
- 32 in
- Product Length Depth:
- 6 in
- Product Weight:
- 33 lb
- Product Width:
- 14 in
- Department:
- Electrical
- Product Finish:
- ANSI 61 gray paint
- Product Material:
- Galvanized steel
- Product Length:
- 6 in
B-LINE 202 H – Frequently Asked Questions
1) How many meter positions does the Eaton B-Line 202 H meter pack have, and what amperage per position?
The 202 H vertical meter pack carries 2 meter positions, each socket rated 200A with 4 jaws and 3 wires. That suits a two-unit duplex or a small multi-family building where each tenant gets a separate utility meter.
2) Can the B-Line 202 H meter pack be installed outdoors?
Yes. The enclosure is 3R rated, which is the standard rain-tight outdoor rating for service equipment, and it is built from galvanized steel finished in ANSI 61 gray paint for weather exposure. It is UL listed.
3) What size service conductors will land in the 202 H meter pack lugs?
Line side lugs take #4 through 600 MCM, and load side lugs take #6 through 250 MCM. Check your calculated service conductor size against the line lug range before you pull wire, especially if you are running parallel or upsized aluminum.
4) Is the 202 H a ring type or ringless meter socket, and does it have a meter bypass?
Ring type cover doors, and no bypass. Utilities vary on which they accept, so confirm with the serving utility that ring type sockets are approved in your territory. Without bypass, the meter has to be pulled with the service de-energized rather than hot-socket bypassed.
5) Is a 4-jaw 3-wire meter socket right for a 120/240V single phase apartment?
Yes. A 4-jaw, 3-wire socket is the standard configuration for single phase 120/240V residential and light commercial service. If your building is three phase, this is the wrong socket and you need a 7-jaw 4-wire unit instead.
6) Does this meter pack work for both overhead and underground service entrance?
It is built for either. The 202 H is listed for overhead/underground feed, so the same unit works whether the utility drops from a weatherhead or comes up from a lateral. Surface mount only, so you need a wall or backboard, not a flush recess.
7) What wall space do I need for the Eaton B-Line 202 H, and how heavy is it to hang?
Plan for a unit measuring 32 in high, 14 in wide, and 6 in deep, weighing 33 lb. It is a one-person hang on a solid surface, but leave working clearance in front per your local code before you set the mounting height.
How fast can I get the B-LINE 202 H delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 202 H come with a warranty?
Absolutely. The B-LINE 202 H is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 202 H?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 202 H from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.