B-Line Eaton series wall mounted panel enclosure, 30" height, 10" length, 24" width, 4, Hinged cover, 4 enclosure, Wall mount, Medium single door, Ex

It carries a NEMA 4 rating, so it is built to keep out windblown dust, rain, splashing water and hose-directed water. The seal comes from a seamless poured in-place gasket compressed by stainless steel door clamps, and the box is UL 50 listed. NEMA 4 does not include corrosion resistance beyond the painted carbon steel shell, so for corrosive or chemical areas you want a 4X stainless or non-metallic type instead.

30 inches high, 24 inches wide and 10 inches deep. That 10 inch depth is what decides whether your breakers, terminal blocks or drive will clear the door, so measure your deepest component plus wire bend space before committing. It weighs 60.6 lb empty.

No. The 302410-4 uses external mounting feet, so the back of the box stands off the wall surface and your fasteners land outside the enclosure, which keeps the NEMA 4 seal intact. Plan for four anchors rated well above the 60.6 lb empty weight plus whatever you install inside.

Yes, the hinged single door has a padlock provision built in, plus stainless steel clamps that draw the door tight against the gasket. Clamps do the sealing; the padlock is there for access control in plant, utility and outdoor locations.

14 gauge carbon steel, painted ANSI 61 grey. That is the common weight for a wall mounted industrial box this size and it holds shape when you drill conduit hubs in the sides or bottom. Any hole you cut has to be resealed with a NEMA 4 rated hub or fitting or you lose the rating.

It is finished in ANSI 61 grey, the standard industrial enclosure color, so it lines up visually with most existing B-Line, Hoffman and similar wall boxes. Style is a medium single door, hinged, wall mounted.

Country of origin is the United States, which matters if you are procuring against a domestic-content requirement on a government or institutional job.