B-Line Eaton series wall mounted panel enclosure, 36" height, 10" length, 30" width, 4X, Hinged cover, 4XSS63PT enclosure, Wall mount, Medium single

NEMA 4X is the rating to look for when the box gets hosed down or sits in salt air, and the B-Line 4XSS63PT is built for it: 316 stainless steel body in a 14 gauge wall thickness, with a seamless poured in-place gasket sealing the hinged cover. 316 is the marine grade of stainless, so chloride exposure (coastal, food plant, wastewater) is where it earns its keep over a painted steel 4X box.

36 inches high, 30 inches wide, and 10 inches deep, which is the depth you have to work with for breakers, drives, or terminal rails. The model number reads the same way: 363010 for 36 x 30 x 10. Plan wall space beyond the box itself, because it mounts on external feet that stand it off the wall.

It wall mounts on external mounting feet, so the fasteners land outside the enclosure body and nothing penetrates the sealed interior. That is what keeps the NEMA 4X seal intact. The feet hold the box off the wall surface, which also lets water drain behind it rather than pooling against the back.

The 4XSS63PT uses a 3-point latching handle, which pulls the door tight at top, center, and bottom from one handle. On a 36 inch tall door that even gasket compression is what holds the 4X seal, and it means one motion to open instead of working around a row of clamps. The handle also carries a key lock padlock provision, so you can pad-lock it or key it for lockout and restricted access.

It carries a UL 508A certification, the standard for industrial control panels, so it can be used as the housing for a listed control panel build. Confirm your panel shop builds to the same listing so the completed assembly keeps it.

Yes. The enclosure ships with a key lock padlock provision, so the door accepts a padlock for lockout/tagout, or you can key it where you need to restrict access to controls. Useful in schools, plants, and any facility where unqualified personnel walk past the panel.

88.5 lb empty. Between the weight and the 36 x 30 footprint, treat it as a two-person lift and anchor the mounting feet into structure or solid blocking, not hollow drywall alone. Add the weight of whatever gear you are mounting inside before you pick anchors.

Hinged. The door stays attached and swings, which matters on a box this size because a loose 36 by 30 stainless cover is awkward to handle on a ladder and easy to damage. Leave swing clearance to one side when you lay out the wall.

The 4XSS63PT is the enclosure itself, a medium single door stainless box with hinged cover, gasket, latching handle, and mounting feet. Panel mounting hardware and any inner subpanel are ordered separately, so spec the back panel and DIN rail you need for the equipment going in the 10 inch depth.

Country of origin is the US, which is the detail that decides it on government, federal, and institutional jobs carrying domestic sourcing requirements. The orderable part number is 363010-4XSS63PT.

It is a #4 brushed finish on 316 stainless, the standard directional satin grain you see on commercial stainless equipment, so it lines up visually with other #4 brushed boxes and food-service gear. Confirm the finish call-out on any existing enclosures you are matching, since a mill or 2B finish will read differently side by side.