Eaton B-Line series wireway, 4" height, 36" length, 4" width, 12LW wireway, Wireway hanger, Hinged cover, NEMA 12, Steel, Oil-resistant gasket, Hinged, ANSI 61 gray, 14 gauge
Manufacturer Resources
Product Specs
- Certifications:
- CSA C22.2.
- Closure Type:
- Hinged
- Finish Color:
- ANSI 61 gray
- Material Thickness:
- 14 gauge
- Mounting Method:
- Wireway hanger
- Product Height:
- 4 in
- Product Length Depth:
- 36 in
- Product Weight:
- 15.358 lb
- Product Width:
- 4 in
- Special Features:
- Cover held by heavy-duty butt hinges & quick-release latches
- Department:
- Electrical
- Product Type:
- 12LW wireway
- Product Details:
- 12LW wireway
- Product Length:
- 36 in
B-LINE 4436-12LW – Frequently Asked Questions
1) Is the Eaton B-Line 4436-12LW wireway rated for wet or washdown areas?
The 4436-12LW is a NEMA 12 wireway with an oil-resistant gasket under the cover, so it is built for indoor use against falling dirt, dust, and dripping oil or coolant. NEMA 12 is not a wet-location or washdown rating. For hosedown areas or outdoor runs you need a NEMA 4 or 4X wireway instead.
2) Does the cover on this 4 x 4 wireway come off, or does it hinge?
The cover is hinged, carried on heavy-duty butt hinges with quick-release latches. It swings open for pulling and dressing conductors and stays attached, so nothing gets dropped or lost on a lift. If your install has an obstruction directly above or beside the trough that blocks a swinging cover, a screw-cover wireway is the better choice.
3) How is the B-Line 12LW wireway supported when mounting?
It is designed to be supported by wireway hangers rather than bolted flat to a wall surface. Plan hanger points into the run before you set the trough, and order the hangers separately because they are not part of the wireway itself.
4) What gauge steel and what color is the B-Line 4436-12LW wireway?
14 gauge steel, finished in ANSI 61 gray. That is the standard gray on most industrial panelboards and control enclosures, so a run of this wireway matches gear already on the wall in a plant or mechanical room.
5) How much does a 36 inch section of this wireway weigh for overhead hanging?
A single 36 inch section runs 15.358 lb. Multiply by the number of sections between hanger points when you size threaded rod, strut, and anchors for an overhead run, and add for the conductor fill.
6) Is this wireway acceptable for a job in Canada?
The 4436-12LW carries CSA C22.2, so it is recognized for Canadian installations as well as US work. That matters on cross-border industrial and institutional jobs where the inspector wants CSA marking on the raceway.
How fast can I get the B-LINE 4436-12LW delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 4436-12LW come with a warranty?
Absolutely. The B-LINE 4436-12LW is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 4436-12LW?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 4436-12LW from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.