B-Line Eaton series wireway, 8" height, 60" length, 8" width, 3RHS NK wireway, Embossed thru holes, No knockouts, Hinged cover, 1, Galvaneal steel, H

No. The 8860-3RHS NK is a NEMA 1 enclosure, which is indoor general purpose only and gives no protection against rain, dripping water, or washdown. For an outdoor run you need a NEMA 3R raintight wireway instead. The 8860 does carry CSA C22.2 certification, and the cover is secured to the body with a gasketed retaining screw, but that does not change the NEMA 1 rating.

No knockouts. The 8860-3RHS NK is the NK (no knockout) version, so every conduit entry gets field drilled or punched wherever you want it. That's the version electricians usually prefer when the conduit layout doesn't line up with factory spacing. If you'd rather have pre-punched entries, order the knockout version of the same trough size.

The cover is hinged along the trough and swings open rather than lifting off, so you can pull and land wire without juggling a loose lid overhead. It's held shut by a gasketed retaining screw. That makes it workable where the wireway is mounted high or against a wall and there's nowhere to set a removable cover down.

The 8860-3RHS NK is a straight 60 inch trough with its hinged cover; it does not include elbows, tees, end plates, couplings, or mounting fasteners. Order those separately in the matching 8x8 size, and remember the NK body has no knockouts, so you'll be drilling your own conduit entries.

14 gauge galvaneal steel finished in ANSI 61 gray, which is the standard gray used on most commercial panelboards, disconnects, and control enclosures, so it blends with existing electrical gear in a mechanical room or plant.

Yes, it is certified to CSA C22.2, so it can be specified on Canadian projects as well as US work. The exact part number to reference on a submittal is 8860-3RHS NK.