You may also like
Eaton B-Line series wireway connector, Adapter style, Wireway connector, NEMA 1, Galvanized steel, 10" X 10"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Product Height:
- 10 in
- Product Length Depth:
- 10 in
- Product Weight:
- 1.155 lb
- Product Width:
- 10 in
- Wiring Method:
- Adapter style
- Department:
- Electrical
- Product Type:
- Wireway connector
- Product Details:
- Wireway connector
- Product Material:
- Galvanized steel
- Product Length:
- 10 in
B-LINE 1010 HSCA – Frequently Asked Questions
1) Will the Eaton B-Line 1010 HSCA connector fit 10 x 10 wireway?
Yes. The 1010 HSCA adapter is sized for 10 inch by 10 inch wireway, with height, width, and length/depth all listed at 10 in. Run it where you are joining or adapting trough of that cross section, not on 4x4, 6x6, or 8x8 duct.
2) Is the 1010 HSCA wireway connector rated for outdoor or wet locations?
No. It is a NEMA 1 enclosure rating, which is indoor, general purpose, dust and falling dirt only. For outdoor or washdown runs you need a NEMA 3R or 4 rated wireway system instead.
3) Is this Eaton B-Line wireway adapter UL Listed for an inspected commercial job?
The 1010 HSCA carries a UL Listed mark, which is what most electrical inspectors look for on wireway fittings in commercial and institutional work.
4) What is an adapter style wireway connector actually used for?
Adapter style is the wiring method here: the fitting adapts one wireway opening to a mating component or trough section so conductors pass through a continuous raceway. It is not a tee, elbow, or end plate, so if you need to change direction or close a run off you want those fittings instead.
5) Which Eaton B-Line part number should I order for a 10 inch square wireway adapter?
Order manufacturer part number 1010 HSCA from Eaton's B-Line series. That is the 10 x 10, NEMA 1, galvanized steel adapter style wireway connector.
6) How heavy is the 10 x 10 B-Line adapter connector for overhead handling?
It weighs 1.155 lb, so it is a one hand piece on a ladder or lift. The weight of the run itself, not this fitting, drives your trapeze or strut support spacing.
How fast can I get the B-LINE 1010 HSCA delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 1010 HSCA come with a warranty?
Absolutely. The B-LINE 1010 HSCA is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 1010 HSCA?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 1010 HSCA from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.