You may also like
Eaton B-Line series wireway cross fitting, Lay-in, Wireway cross fitting, NEMA 1 rated, Steel, ANSI 61 gray painted, 10" X 10"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 10 in
- Product Length Depth:
- 10 in
- Product Weight:
- 10.531 lb
- Product Width:
- 10 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Wireway cross fitting
- Product Details:
- Wireway cross fitting
- Product Material:
- Steel
B-LINE 1010 LTX – Frequently Asked Questions
1) Will the B-Line 1010 LTX cross fitting mate with 10 x 10 wireway trough?
Yes. The Eaton B-Line 1010 LTX is sized 10 in by 10 in on all four openings, so it joins four runs of 10 x 10 wireway at a four-way intersection. It will not adapt between sizes, so a run changing from 10 x 10 to another cross section needs a reducer, not this fitting.
2) Is this wireway cross fitting rated for outdoor or wet locations?
No. The 1010 LTX carries a NEMA 1 degree of protection, which is indoor, general purpose only, protecting against incidental contact with the enclosed conductors and falling dirt. It has no gasketing for rain, washdown, or dust-tight service. For outdoor or wet locations you need a NEMA 3R or 4 rated cross fitting instead.
3) What does lay-in construction mean on a B-Line wireway cross fitting?
Lay-in means the cover comes off so conductors drop straight down into the fitting instead of being pulled through it. On a four-way intersection that matters: you can lay the wire in, fan it, and replace the cover rather than fishing four separate pulls through a closed box. The 1010 LTX is built this way.
4) Is the 1010 LTX UL Listed?
Yes, the B-Line 1010 LTX wireway cross fitting is UL Listed, which is what most inspectors and institutional specs call for on a lay-in wireway system.
5) Should I use a cross fitting or two tees where four wireway runs meet?
Use the cross where four runs genuinely intersect at one point. The 1010 LTX gives a single 10 x 10 four-way body, so you make four connections instead of six and you keep one lay-in cover over the whole splice area. Two tees back to back adds an extra joint and a short filler piece, and only makes sense when the runs are offset rather than centered on each other.
6) What is the exact part number to order this B-Line cross fitting?
Order Eaton B-Line model 1010 LTX. That is the 10 x 10, NEMA 1, lay-in steel cross fitting in ANSI 61 gray. There are no size or finish options under that number.
7) What finish does this cross fitting come in, and will it match existing B-Line wireway?
Steel with an ANSI 61 gray painted finish, which is the standard gray used across B-Line wireway trough and fittings, so a replacement fitting drops into an existing gray run without a color mismatch. There is no alternate finish on the 1010 LTX.
8) How much does the 10 x 10 wireway cross fitting weigh for overhead support planning?
The 1010 LTX weighs 10.531 lb bare. Add conductor weight in the fitting and the load from the four trough runs framing into it when you size hangers or trapeze at the intersection.
How fast can I get the B-LINE 1010 LTX delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 1010 LTX come with a warranty?
Absolutely. The B-LINE 1010 LTX is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 1010 LTX?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 1010 LTX from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.