You may also like
Eaton B-Line series wireway cross fitting, Lay-in, Wireway cross fitting, NEMA 1 rated, Steel, ANSI 61 gray painted, 2.5" X 2.5"
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Degree Of Protection:
- 1
- Finish Color:
- ANSI 61 gray painted
- Product Height:
- 2.5 in
- Product Length Depth:
- 11.94 in
- Product Weight:
- 3.643 lb
- Product Width:
- 2.5 in
- Wiring Method:
- Lay in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Wireway cross fitting
- Product Details:
- Wireway cross fitting
- Product Material:
- Steel
B-LINE 22 HSX – Frequently Asked Questions
1) Will the B-Line 22 HSX cross fitting mate with 2-1/2 inch square wireway?
Yes. The 22 HSX is sized 2.5 in by 2.5 in, so it joins standard 2-1/2 by 2-1/2 inch lay-in wireway trough on all four legs. It is the four-way cross, used where two runs intersect and conductors need to pass in both directions. Overall it runs 11.94 inches across, so allow that much clear space at the intersection.
2) Is this wireway cross rated for outdoor or wet locations?
No. The 22 HSX carries a NEMA 1 degree of protection, which is indoor, general purpose enclosure protection only. For rain, washdown, or exterior runs you need a NEMA 3R or 4 raintight wireway fitting instead. It is UL Listed.
3) What does lay-in construction mean on this cross fitting, and does it help during install?
Lay-in means the cover comes off so conductors drop straight into the trough rather than being pulled through. On a cross, that matters: you can lay in both runs at the intersection and dress them without fishing wire around four corners. It is the normal choice for panel rooms and equipment feeds where circuits get added later.
4) Should I use a cross fitting or two tees where wireway runs intersect?
Use the cross when four trough legs meet at one point, which is what the 22 HSX is built for. Two tees only work if the runs are offset from each other rather than crossing, and that adds a second set of joints and covers. For a true four-way intersection in 2-1/2 inch lay-in wireway, the single cross is the cleaner pull.
5) Will the gray finish match the rest of my wireway run?
The 22 HSX is painted ANSI 61 gray, the standard gray used across B-Line lay-in wireway trough and fittings, so it blends with existing runs and panel gear in that color. The body is steel, not aluminum or stainless.
6) How much does the 22 HSX weigh for overhead support planning?
3.643 lb. It is light enough that the trough hangers on either side of the intersection normally carry it, but on a four-way junction you are landing four trough ends plus conductor weight in one spot, so support each leg near the fitting rather than relying on the cross itself.
How fast can I get the B-LINE 22 HSX delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 22 HSX come with a warranty?
Absolutely. The B-LINE 22 HSX is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 22 HSX?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 22 HSX from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.